NSN DRAWING 8941 MARK 39

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

not established reliability indicator, switchboard, wsd: electric power generation system end item identification.

NSN 5950-01-468-1237 Datasheet

(NSN) National Stock Number

5950-01-468-1237

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-468-1237

Requires Demilitarization

Yes

(INC) Item Name Code

32496

Date

Wed, Sep 29, 1999

End Item Identification

switchboard, wsd: electric power generation system

Reliability Indicator

not established

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032496

Cross Reference

CAGE Codes

93663

I T I Electronics, Inc.

U.s./canadian manufacturers

0CAT4

Point Eight Power, Llc

U.s./canadian manufacturers

59138

Instrument Transformers Inc

U.s./canadian manufacturers

6Z538

Carolina Power Systems of Sumter Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-01-468-1237?

   The FSCG of the NSN 5950-01-468-1237 is 5950

2. Does NSN 5950-01-468-1237 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5950-01-468-1237 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5950-01-468-1237 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5950-01-468-1237 was assigned to the Federal Catalog?

   It was assigned 27 years ago, on Wed, Sep 29, 1999