NSN E106A4

An item consisting of a hand wired or printed wiring board, with or without a retaining plate, rails, brackets, or electrical connector(s) which is designed to provide access to a circuit card assembly or electronic components assembly for testing, test point checking and troubleshooting.

125.0 ac at sea level contact voltage rating in volts, 5.0 amperes resistive load and 3.0 amperes lamp load ac at sea level contact load current rating, breaks before makes each section rear contact switching action, 1.0 amperes resistive load and 500.0 milliamperes inductive load highest dc voltage rating at sea level contact load current rating, 125.0 highest dc voltage rating at sea level contact voltage rating in volts.

NSN 5930-00-929-3853 Datasheet

(NSN) National Stock Number

5930-00-929-3853

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-929-3853

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Wed, Apr 24, 1968

Schedule B Code

8536509020

Contact Load Current Rating

1.0 amperes resistive load and 500.0 milliamperes inductive load highest dc voltage rating at sea level

Contact Load Current Rating

5.0 amperes resistive load and 3.0 amperes lamp load ac at sea level

Contact Switching Action

breaks before makes each section rear

Contact Voltage Rating In Volts

125.0 highest dc voltage rating at sea level

Contact Voltage Rating In Volts

125.0 ac at sea level

Contact Voltage Rating In Volts

30.0 lowest dc voltage rating at sea level

First Flat Length

0.500 inches nominal single actuator

Flat Height

0.218 inches nominal single actuator

Hazardous Locations/Environmental Protection

dustproof

Individual Section Quantity

4

Longest Horizontal Distance Between Mounting Centers

1.437 inches nominal single mounting facility

Longest Vertical Distance Between Mounting Centers

1.750 inches nominal single mounting facility

Mounting Facility Pattern

four position rectangular single mounting facility

Mounting Method

bracket(s) single mounting facility

Overall Diameter

2.000 inches nominal

Overall Length

3.499 inches nominal

Pole Quantity

1 each section rear

Shaft Diameter

0.250 inches nominal single actuator

Shaft Flat/Slot Angular Location

0.0 degrees from contact position 1 single actuator

Shaft Length

1.530 inches nominal single actuator

Shaft Type

round, flatted single actuator

Style Designator

tap, circular, bushing mount

Switch Actuator Indexing Position Quantity

4 single actuator

Switch Actuator Positioning Increment

45.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab w/screw

Throw Quantity

4 each section rear

Unthreaded Mounting Hole Diameter

0.188 inches nominal single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

44114

Bae Systems Land & Armaments L.p.

U.s./canadian manufacturers

82121

Electro Switch Corp. Dba Electro Switch Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-929-3853?

   The FSCG of the NSN 5930-00-929-3853 is 5930

2. Does the NSN 5930-00-929-3853 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-929-3853 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-929-3853 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-929-3853 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-929-3853 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Wed, Apr 24, 1968