NSN E289

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

frequency rating, fully inclosed inclosure type, unable to decode input-output phase relationship, 0.390 inches minimum and 0.410 inches maximum body length, 0.750 inches maximum body outside diameter.

NSN 5950-00-008-0346 Datasheet

(NSN) National Stock Number

5950-00-008-0346

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-008-0346

Requires Demilitarization

Yes

(INC) Item Name Code

32496

Date

Fri, Jul 14, 1972

Winding Operating Voltage

150.00 ac volts single component single primary

Winding Operating Voltage

23.00 ac volts single component single secondary

Winding Power Rating

44.0 milliwatts single component single secondary

Winding Operating Current

Up to 1.0 amperes ac single component single secondary

Winding Function and Quantity

1 primary single component and 1 secondary single component

Inclosure Type

Fully inclosed

Mounting Method

Terminal single group

Body Outside Diameter

Up to 0.750 inches

Operating Temperature

Up to 105.0 degrees Celsius

Body Length

0.390 inches to 0.410 inches

Output Phase Relationship Input

Single phase to single phase single component

Frequency Rating

8.0 kilohertz to 11.0 kilohertz single component

Reliability Indicator

Not established

Terminal Type and Quantity

4 wire lead

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032496

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

59364

Honeywell International Inc. Dba Honeywell International Div Aerospace - Tempe (west Warner Road)

U.s./canadian manufacturers

77068

Allied-Signal Inc Dba Allied-Signal Aerospace Co Electrodynamics Div

U.s./canadian manufacturers

05397

Union Carbide Corp Materials Systems Div

U.s./canadian manufacturers

09798

Payne Magnetics, Inc.

U.s./canadian manufacturers

83740

Eveready Battery Co Inc

U.s./canadian manufacturers

89244

Pickard and Burns Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-008-0346?

   The FSCG of the NSN 5950-00-008-0346 is 5950

2. Does NSN 5950-00-008-0346 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5950-00-008-0346 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5950-00-008-0346 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5950-00-008-0346 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Fri, Jul 14, 1972

6. What is the frequency rating of nsn 5950-00-008-0346?

   8.0 kilohertz to 11.0 kilohertz single component

7. What is the frequency rating of nsn 5950-00-008-0346?

   8.0 kilohertz to 11.0 kilohertz single component

8. What is the frequency rating of nsn 5950-00-008-0346?

   8.0 kilohertz to 11.0 kilohertz single component