NSN E51SCL

An inline or cartridge type item designed to control the flow of fluids within a closed system. Excludes:items actuated by a predetermined pressure and/or temperature, items designed for use with breathing gasses, or those designed to vent or calibrate fluids.

fully inclosed inclosure type, switch lmt e50ar1 end item identification, 132.0 ac maximum voltage rating in volts, press fit mounting method, 1.000 amperes inductive ac and 1.000 amperes resistive ac contact load current rating at maximum rated voltage.

NSN 5930-01-527-5873 Datasheet

(NSN) National Stock Number

5930-01-527-5873

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-527-5873

Requires Demilitarization

Yes

(INC) Item Name Code

00399

Date

Wed, Feb 9, 2005

Schedule B Code

8536509050

Contact Load Current Rating At Maximum Rated Voltage

1.000 amperes inductive ac and 1.000 amperes resistive ac

End Item Identification

switch lmt e50ar1

Inclosure Type

fully inclosed

Maximum Voltage Rating In Volts

132.0 ac

Mounting Method

press fit

Terminal Type And Quantity

1 connector, plug

Special Features

this solid state switch has both normally open and normally closed outputs. two loads may be connected at the same time. to connect one load, wire only the desired output terminal. factory-installed light emitting diodes signify switch closure for n.o. and n.c.

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000399

Cross Reference

CAGE Codes

68592

Eaton Corp Cutler Hammer Products

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9050

Description

switches, slide, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-527-5873?

   The FSCG of the NSN 5930-01-527-5873 is 5930

2. Does the NSN 5930-01-527-5873 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509050

3. Does NSN 5930-01-527-5873 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-527-5873 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-527-5873 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-527-5873 was assigned to the Federal Catalog?

   It was assigned 21 years ago, on Wed, Feb 9, 2005