NSN EB2060V

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

6.000 inches nominal6.000 inches nominal body length, magnetic blowoutmagnetic blowout arc quenching method, multipole-multiple actuator typemultipole-multiple actuator type body style, trip-resettrip-reset actuator function, at pole twoat pole two actuator position designation.

NSN 5925-00-265-9488 Datasheet

(NSN) National Stock Number

5925-00-265-9488

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

00-265-9488

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Tue, Jan 1, 1963

Schedule B Code

8536200040

Actuator Function

trip-resettrip-reset

Actuator Position Designation

at pole twoat pole two

Arc Quenching Method

magnetic blowoutmagnetic blowout

Body Length

6.000 inches nominal6.000 inches nominal

Body Style

multipole-multiple actuator typemultipole-multiple actuator type

Body Width

2.750 inches nominal2.750 inches nominal

Bushing Length

0.125 inches nominal0.125 inches nominal

Center To Center Distance Between Terminals Parallel To Length

5.062 inches nominal5.062 inches nominal

Center To Center Distance Between Terminals Parallel To Width

1.375 inches nominal1.375 inches nominal

Circuit Protection Type

overcurrent all locationsovercurrent all locations

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

4.500 inches nominal4.500 inches nominal

Fragility Factor

moderately ruggedmoderately rugged

Frequency In Hertz

60.0 all locations60.0 all locations

Inclosure Protection Type For Which Designed

dustproof and dustproof and general purpose and general purpose and fungus resistantfungus resistant

Main Contact Tripping Mechanism Type

trip freetrip free

Manual Actuator Type And Quantity

1 toggle1 toggle

Material

plastic caseplastic case

Maximum Continuous Load Current Rating Per Pole

60.0 amperes ac and 60.0 amperes ac and 60.0 amperes dc all locations60.0 amperes dc all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

10000.0 ac and 10000.0 ac and 5000.0 dc all locations5000.0 dc all locations

Mounting Facility Type And Quantity

2 unthreaded hole(s)2 unthreaded hole(s)

Mounting Surface To Terminal End Distance

3.375 inches nominal3.375 inches nominal

Operating Voltage Type And Rating Per Pole In Volts

240.0 ac and 240.0 ac and 250.0 dc all locations250.0 dc all locations

Pole Quantity

22

Reset Method

manualmanual

Special Handling Feature

magneticmagnetic

Storage Type

general purpose warehousegeneral purpose warehouse

Terminal Type And Quantity

4 compression4 compression

Trip Release Ambient Temp Rating

50.0 celsius nominal all locations50.0 celsius nominal all locations

Trip Release Characteristic

time delay all locationstime delay all locations

Trip Release Method

thermal-magnetic all locationsthermal-magnetic all locations

Trip Delay Time In Seconds Per Rated Continuous Current

20.000 minimum at 200 pct and 20.000 minimum at 200 pct and 105.000 maximum at 200 pct all locations105.000 maximum at 200 pct all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 all locations125.0 all locations

Unpackaged Unit Weight

3.000 pounds nominal3.000 pounds nominal

Unthreaded Mounting Hole Diameter

0.188 inches nominal0.188 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

65054

Westinghouse Electric Corp Power Generation-Generator Div

U.s./canadian manufacturers

79500

Westinghouse Electric Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-00-265-9488?

   The FSCG of the NSN 5925-00-265-9488 is 5925

2. Does the NSN 5925-00-265-9488 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-00-265-9488 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-00-265-9488 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-00-265-9488 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-00-265-9488 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963