NSN EC30-0010-1

Two or more insulated conductors (solid or stranded) contained in a common covering, or two or more insulated conductors twisted or molded together without a common covering, or one insulated conductor with a metallic covering, covering, shield, or outer conductor. The rated working voltage of the item must be 300 volts or more, or in lieu of this the test voltage must be 1,000 volts or more; and the size of each individual conductor must be number 18 american wire gage (0.75 square millimeters) or larger. For cables with uninsulated neutral conductor use the hightest rated voltage. Refers to bulk quantities only, for items of definite length with processed ends or terminated in fittings, see cable assembly, power, electrical. For low voltage aircraft and automotive cable, see cable, special purpose, electrical.

decimal, 1 pole - 12 positions single section contact arrangement truth table, unable to decode contact arrangement truth table, 100.0 milliamperes resistive load dc at sea level contact load current rating, 100.0 milliamperes resistive load ac at sea level contact load current rating, 115.0 ac at sea level contact voltage rating in volts.

NSN 5930-01-413-7927 Datasheet

(NSN) National Stock Number

5930-01-413-7927

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-413-7927

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, May 23, 1995

Schedule B Code

8536509020

Contact Arrangement Truth Table

decimal, 1 pole - 12 positions single section

Contact Arrangement Truth Table

unable to decode

Contact Load Current Rating

100.0 milliamperes resistive load ac at sea level

Contact Load Current Rating

100.0 milliamperes resistive load dc at sea level

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

First Flat Length

0.218 inches nominal single actuator

Flat Height

0.219 inches nominal single actuator

Individual Section Quantity

2

Pile-Up Contact Form Arrangement

1a single switch single section in-line

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Type

flatted bushing at 3:00 oclock

Overall Diameter

1.030 inches maximum

Overall Length

2.810 inches nominal

Shaft Diameter

0.215 inches nominal single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.430 inches nominal single actuator

Style Designator

tap, circular, bushing mount

Switch Actuator Indexing Position Quantity

6 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

coded and pile-up

Terminal Type

printed circuit

Thread Class

2a single mounting facility

Thread Length

0.310 inches nominal single mounting facility

Thread Series Designator

unf single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

11627

L3 Technologies, Inc. Div Communication Systems-West

U.s./canadian manufacturers

91812

Janco Corporation Dba Janco Corp Div Mason Controls

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-413-7927?

   The FSCG of the NSN 5930-01-413-7927 is 5930

2. Does the NSN 5930-01-413-7927 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-01-413-7927 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-413-7927 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-413-7927 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-413-7927 was assigned to the Federal Catalog?

   It was assigned 31 years ago, on Tue, May 23, 1995