NSN EC59-PRO

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

digital display indicator type, 4 display digit quantity, handheld installation design, unable to decode measurement range, liquid crystal display type.

NSN 6625-01-716-1099 Datasheet

(NSN) National Stock Number

6625-01-716-1099

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

01-716-1099

Requires Demilitarization

Yes

(INC) Item Name Code

68853

Date

Wed, Nov 29, 2023

Display Digit Quantity

4

Display Type

liquid crystal

Indicator Type

digital display

Installation Design

handheld

Measurement Range

unable to decode

Overall Diameter

38.0 millimeters nominal

Style Designator

hand-held

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0068853

Cross Reference

CAGE Codes

98664

Milwaukee Electronics Corporation Dba Mec Midwest Div Milwaukee Electronics

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 6625-01-716-1099?

   The FSCG of the NSN 6625-01-716-1099 is 6625

2. Does NSN 6625-01-716-1099 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6625-01-716-1099 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6625-01-716-1099 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6625-01-716-1099 was assigned to the Federal Catalog?

   It was assigned 2 years ago, on Wed, Nov 29, 2023