NSN ED63M030

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

multipole-single actuator type body style, overcurrent all locations circuit protection type, 3.000 inches nominal body width, switchboard, emergency p/n 213041m2 onboard 225 ft wlb coast guard vessels end item identification, 6.343 inches nominal body height.

NSN 5925-01-415-3640 Datasheet

(NSN) National Stock Number

5925-01-415-3640

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-415-3640

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Mon, Jun 26, 1995

Schedule B Code

8536200040

Body Height

6.343 inches nominal

Body Style

multipole-single actuator type

Body Width

3.000 inches nominal

Circuit Protection Type

overcurrent all locations

End Item Identification

switchboard, emergency p/n 213041m2 onboard 225 ft wlb coast guard vessels

Frequency In Hertz

60.0 all locations

Main Contact Tripping Mechanism Type

trip free

Material

mica case

Maximum Continuous Load Current Rating Per Pole

30.0 amperes ac all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

18000.0 ac all locations

Operating Voltage Type And Rating Per Pole In Volts

600.0 ac all locations

Pole Quantity

3

Reset Method

manual

Terminal Type And Quantity

6 compression

Trip Release Characteristic

instantaneous all locations

Trip Release Method

magnetic all locations

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

66842

Siemens Energy and Automation Inc Ite Circuit Protection Div

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-415-3640?

   The FSCG of the NSN 5925-01-415-3640 is 5925

2. Does the NSN 5925-01-415-3640 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-415-3640 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-415-3640 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-415-3640 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-415-3640 was assigned to the Federal Catalog?

   It was assigned 31 years ago, on Mon, Jun 26, 1995