NSN EETH507A

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

plugs into com ans dcv/ohms ports; measures surface temp general characteristics item description, digital multimeters mt586a, eedm503a and eedm504a end item identification, interchangeable 8 in. tip special features.

NSN 6685-01-463-6870 Datasheet

(NSN) National Stock Number

6685-01-463-6870

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6685 - Humidity Measuring and Controlling Instruments, Temperature and Pressure

(NIIN) National Item Identification Number

01-463-6870

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Wed, Mar 31, 1999

End Item Identification

digital multimeters mt586a, eedm503a and eedm504a

General Characteristics Item Description

plugs into com ans dcv/ohms ports; measures surface temp

Special Features

interchangeable 8 in. tip

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1448973

Cross Reference

CAGE Codes

55719

Idsc Holdings Llc Div Snap-on Industrial, A Div. Of Idsc Holdings , Llc

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 6685-01-463-6870?

   The FSCG of the NSN 6685-01-463-6870 is 6685

2. Does NSN 6685-01-463-6870 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6685-01-463-6870 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6685-01-463-6870 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6685-01-463-6870 was assigned to the Federal Catalog?

   It was assigned 27 years ago, on Wed, Mar 31, 1999