NSN EN116A

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

6740-00-075-1008, photographic contact printer.

NSN 6740-00-075-1008 Datasheet

(NSN) National Stock Number

6740-00-075-1008

(FSG) Federal Supply Group

67 - Photographic Equipment

(FSC) Federal Supply Classification

6740 - Photographic Developing and Finishing Equipment

(NIIN) National Item Identification Number

00-075-1008

Requires Demilitarization

Yes

(INC) Item Name Code

05981

Date

Wed, Dec 13, 1972

Schedule B Code

9010100000

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

NRP - Navicp-erp 700 robbins avenue philadelphia, pa 19111-5098

Pseudo Item Name Code

0005981

Cross Reference

CAGE Codes

0ZW37

Danka Office Imaging Company

U.s./canadian manufacturers

32153

Eastman Kodak Co Commercial & Government Systems

U.s./canadian manufacturers

06400

Joint Photographic Type Designation System

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

W - Rating variable

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

63220

Water Commodity

756 - Photo equipment and supplies, other than film or paper (see 759)

National Motor Freight Classification Item Number

133300

Schedule B & Trade

Schedule B

9010-10-0000

Description

apparatus & equipment, automatically developing photographic film/paper in rolls, automatically exposing developing film to roll of photographic paper

End Use

21190 - Photo, service industry machinery

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

88135

(NAICS) North American Industrial Classification System

333310

Questions & Answers

1. What is the FSCG of the NSN 6740-00-075-1008?

   The FSCG of the NSN 6740-00-075-1008 is 6740

2. Does the NSN 6740-00-075-1008 have a Schedule B code assigned?

   Yes, the Schedule B code is 9010100000

3. Does NSN 6740-00-075-1008 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 6740-00-075-1008 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6740-00-075-1008 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6740-00-075-1008 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Wed, Dec 13, 1972