1. Home /
  2. FSC NSN Catalog /
  3. Except Airborne Radio and Television Communication Equipment /
  4. F-9800

NSN F-9800

Radio Frequency Preselector

A test instrument which will measure an unknown resistance by electrical comparison with calibrated known resistors.

this is a pre/postselector which permits operation of collocated receivers and transmitters on frequencies seperated by as little as 10%,provides front end selectivity when used with receivers,rejects spurious output and broadband noise when used as a postselector with transmitters,it has automatic switchover to low gain during rf overload or to protect mode during extreme overload functional description, salient characteristics,frequency range 1.60 to 29.990mhz,10ms maximum tuning time,parallel (bcd) and serial (rs-232/rs-422) remote control,40db typical unwanted signal attenuation,built-in-test,selectable gain,automatic switching between preselector and postselector modes for use with transceivers special features, dimensions 1.75in high 19.00in wide 19.00in deep standard rack mount; weight 12lb; power requirement 115/230vac (47-63hz) or 12/24vdc,20va maximum; input and output impedence is 50ohm general characteristics item description.

NSN 5820-01-369-9166 Datasheet

(NSN) National Stock Number
5820-01-369-9166
(NIIN) National Item Identification Number
01-369-9166
Requires Demilitarization
Yes
(INC) Item Name Code
77777
Date
Fri, Jan 8, 1993
General Characteristics Item Description
dimensions 1.75in high 19.00in wide 19.00in deep standard rack mount; weight 12lb; power requirement 115/230vac (47-63hz) or 12/24vdc,20va maximum; input and output impedence is 50ohm
Functional Description
this is a pre/postselector which permits operation of collocated receivers and transmitters on frequencies seperated by as little as 10%,provides front end selectivity when used with receivers,rejects spurious output and broadband noise when used as a postselector with transmitters,it has automatic switchover to low gain during rf overload or to protect mode during extreme overload
Special Features
salient characteristics,frequency range 1.60 to 29.990mhz,10ms maximum tuning time,parallel (bcd) and serial (rs-232/rs-422) remote control,40db typical unwanted signal attenuation,built-in-test,selectable gain,automatic switching between preselector and postselector modes for use with transceivers

Identification

Demilitarization Code
C - "usml or ccl military items - demil required. Remove and demilitarize installed key point(s) items as demil code "d". (note 4)."
Precious Metals Indicator
A - Item does not contain precious metal.
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Pseudo Item Name Code
1446715

Cross Reference

CAGE Codes

12338
Riimic, Llc Dba Sunair Electronics
U.s./canadian manufacturers

Freight Information

Air Commodity
HQ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Less than Carload Rating
M - 85.0
National Motor Freight Class Rating
G - 125.0
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
3 - Electrostatic sensitive device (esd)
Uniform Freight Classification Item Number
35070
Water Commodity
738 - Computing equipment, computer components, and circuit cards
National Motor Freight Classification Item Number
063035

Questions & Answers

  1. What is the FSCG of the NSN 5820-01-369-9166?

    The FSCG of the NSN 5820-01-369-9166 is 5820

  2. Does NSN 5820-01-369-9166 require demilitarization?

    "usml or ccl military items - demil required. Remove and demilitarize installed key point(s) items as demil code "d". (note 4)."

  3. Does NSN 5820-01-369-9166 contain precious materials?

    Item does not contain precious metal.

  4. Does NSN 5820-01-369-9166 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  5. When the NSN 5820-01-369-9166 was assigned to the Federal Catalog?

    It was assigned 33 years ago, on Fri, Jan 8, 1993

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.