NSN F10159

A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also rod, threaded end and rod, continuous thread.

1.969 inches minimum and 2.031 inches maximum body width, 2.875 inches minimum and 3.125 inches maximum body height, 2000.0 average life rating in hours, 1.969 inches minimum and 2.031 inches maximum body length, discrimination at specified frequencies per function in decibels.

NSN 5915-00-994-7730 Datasheet

(NSN) National Stock Number

5915-00-994-7730

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

00-994-7730

Requires Demilitarization

Yes

(INC) Item Name Code

13911

Date

Mon, Jan 1, 1962

Schedule B Code

8527995030

Average Life Rating In Hours

2000.0

Body Height

2.875 inches minimum and 3.125 inches maximum

Body Length

1.969 inches minimum and 2.031 inches maximum

Body Width

1.969 inches minimum and 2.031 inches maximum

Discrimination At Specified Frequencies Per Function In Decibels

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.355 inches minimum and 1.395 inches maximum

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.355 inches minimum and 1.395 inches maximum

Frequency Band Width Per Function

10.00 hertz blank and 1.00 kilohertz blank

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

hermetically sealed

Input Impedance Per Function W/Load

250.0 ohms blank

Insertion Loss At Reference Frequency Per Function In Decibels

2.0 blank

Load Impedance Per Function

5.0 kilohms blank

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

4 threaded stud(s)

Nominal Thread Size

0.164 inches

Operating Temp Range

+0.0 to 50.0 celsius

Output Impedance Per Function W/Source Across Input

5.0 kilohms blank

Overall Height

3.188 inches minimum and 3.562 inches maximum

Reference Frequency Per Function

505.0 hertz blank

Source Impedance Rating Per Function

250.0 ohms blank

Specified Frequencies Of Discrimination Per Function

10.00 hertz blank and 1.00 kilohertz blank and 20.00 kilohertz blank and 350.00 kilohertz blank

Style Designator

rectangular terminal/terminals on one surface

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0013911

Cross Reference

CAGE Codes

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

99109

Chase Corporation Dba Fluid Polymers Div Humiseal Division

U.s./canadian manufacturers

09269

Omex

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

21275

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

069100

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-00-994-7730?

   The FSCG of the NSN 5915-00-994-7730 is 5915

2. Does the NSN 5915-00-994-7730 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-00-994-7730 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5915-00-994-7730 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5915-00-994-7730 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-00-994-7730 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962