NSN F260B501GN

A grouping of two or more different types of electrical/electronic components mounted on a common mounting. It may include an assembly of electrical/electronic components mounted on multiple printed wiring board(s) mounted back to back, stacked, and the like. The item is generally a component of a subassembly and cannot be assigned a more definite item name. Excludes:items which may be identified as a subassembly. For an assembly of electrical/electronic components mounted on a single printed wiring board, see circuit card asseembly. Do not use if a more specific name applies.

1.250 inches nominal body width, 1.844 inches nominal body height, w/mtg tabs/flanges, terminal(s) on one surface body style, 2.281 inches nominal body length, 500.000 picofarads single section capacitance value per section.

NSN 5910-00-191-5592 Datasheet

(NSN) National Stock Number

5910-00-191-5592

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-191-5592

Requires Demilitarization

Yes

(INC) Item Name Code

00005

Date

Tue, Jan 1, 1963

Schedule B Code

8532290020

Body Height

1.844 inches nominal

Body Length

2.281 inches nominal

Body Style

w/mtg tabs/flanges, terminal(s) on one surface

Body Width

1.250 inches nominal

Capacitance Value Per Section

500.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Length

1.625 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

2.625 inches nominal

Highest Frequency At Which Rf Current Rating Applies In Kilohertz

3000.0

Lowest Frequency At Which Rf Current Rating Applies In Kilohertz

100.0

Material

plastic case

Maximum Rf Current Rating At Highest Rated Frequency In Rms Amps

5.0

Maximum Rf Current Rating At Lowest Rated Frequency In Rms Amps

0.75

Mounting Facility Type And Quantity

2 unthreaded mounting holes

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

6000.0 ac-peak single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Diameter

0.090 inches nominal

Terminal Length

1.000 inches nominal

Terminal Type And Quantity

2 threaded stud

Tolerance Range Per Section

-2.00 to 2.00 percent single section

Unthreaded Mounting Hole Diameter

0.203 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000005

Cross Reference

CAGE Codes

06141

L3 Aviation Products, Inc. Dba L3 Technologies

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0020

Description

fixed capacitors, mica dielectric, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-191-5592?

   The FSCG of the NSN 5910-00-191-5592 is 5910

2. Does the NSN 5910-00-191-5592 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290020

3. Does NSN 5910-00-191-5592 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-191-5592 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-191-5592 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-191-5592 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963