NSN F330C6802J050

A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.

w/o mtg facilities terminal(s) on one surface body style, 68000.000 picofarads single section capacitance value per section, 0.600 inches nominal body length, 0.195 inches nominal body height, 0.375 inches nominal body width.

NSN 5910-00-433-5393 Datasheet

(NSN) National Stock Number

5910-00-433-5393

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-433-5393

Requires Demilitarization

Yes

(INC) Item Name Code

00006

Date

Mon, Aug 17, 1970

Schedule B Code

8532250080

Body Height

0.195 inches nominal

Body Length

0.600 inches nominal

Body Width

0.375 inches nominal

Body Style

w/o mtg facilities terminal(s) on one surface

Capacitance Value Per Section

68000.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Length

0.495 inches minimum and 0.505 inches maximum

Dissipation Factor At Reference Temp In Percent

0.3000

Insulation Resistance At Reference Temp

100000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

0.0 single section

Terminal Length

1.250 inches nominal

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-5.00 to 5.00 percent single section

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-50.0 to 50.0 single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000006

Cross Reference

CAGE Codes

15280

Northrop Grumman Systems Corporation Div Es Defensive Systems Division

U.s./canadian manufacturers

26916

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Multiple

U.s./canadian manufacturers

05397

Union Carbide Corp Materials Systems Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-433-5393?

   The FSCG of the NSN 5910-00-433-5393 is 5910

2. Does the NSN 5910-00-433-5393 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-00-433-5393 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-433-5393 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-433-5393 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-433-5393 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Mon, Aug 17, 1970