NSN F55002

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

metal body material, 2.250 inches nominal body height, tin body surface treatment, 6.500 inches nominal body length, 5.500 inches nominal body width.

NSN 5915-01-339-7281 Datasheet

(NSN) National Stock Number

5915-01-339-7281

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

01-339-7281

Requires Demilitarization

Yes

(INC) Item Name Code

00765

Date

Tue, May 28, 1991

Schedule B Code

8527995030

Body Height

2.250 inches nominal

Body Length

6.500 inches nominal

Body Material

metal

Body Surface Treatment

tin

Body Width

5.500 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

4.620 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.500 inches nominal

Features Provided

nut and washer

Full Load Insertion Loss Frequencies In Megahertz

0.0 and 0.15 and 2.0 and 5.0 and 10.0 and 20.0

Full Load Minimum Insertion Loss At Specified Frequency In Decibels

15.0 and 20.0 and 40.0 and 50.0

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

hermetically sealed

Load Impedance Per Function

unable to decode

Maximum Dielectric Withstanding Dc Voltage

2.25 kilovolts at sea level

Maximum Temp Rise

25.0 celsius

Maximum Voltage Drop Per Function

unable to decode

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

8 threaded stud(s)

Nominal Thread Size

0.164 inches

Operating Current Rating Per Function In Amps

unable to decode

Operating Voltage Rating And Type Per Function

unable to decode

Operating Temp Range

-55.0 to 125.0 celsius

Overall Length

7.700 inches nominal

Power Line Frequency Rating Per Function In Hertz

unable to decode

Principal Circuitry Type Per Function

unable to decode

Source Impedance Rating Per Function

unable to decode

Special Features

four filtered functions

Style Designator

rectangular terminal/terminals on opposite surfaces

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000765

Cross Reference

CAGE Codes

26916

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Multiple

U.s./canadian manufacturers

0AM43

Lcr Electronics, Inc Div Lcr Electronics, Inc. Dba Astrodyne Tdi Emi Filters Bu

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58500

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061990

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-01-339-7281?

   The FSCG of the NSN 5915-01-339-7281 is 5915

2. Does the NSN 5915-01-339-7281 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-01-339-7281 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5915-01-339-7281 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5915-01-339-7281 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-01-339-7281 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Tue, May 28, 1991