NSN F7-92

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

2.750 inches nominal body height, 0.375 inches nominal bulb diameter, 3.688 inches nominal bulb length, 72.0 inches nominal capillary tube length, increase contact action stimulus.

NSN 5930-01-073-2410 Datasheet

(NSN) National Stock Number

5930-01-073-2410

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-073-2410

Requires Demilitarization

Yes

(INC) Item Name Code

00451

Date

Tue, Mar 13, 1979

Schedule B Code

9032100000

Body Height

2.750 inches nominal

Bulb Diameter

0.375 inches nominal

Bulb Length

3.688 inches nominal

Capillary Tube Length

72.0 inches nominal

Contact Action Stimulus

increase

Contact Adjustability

deactuation point adjustable and actuation point adjustable

Contact Adjustment Range

+100.00 to 650.00 actuation point degrees fahrenheit and +100.00 to 650.00 deactuation point degrees fahrenheit

Contact Adjustment Type

internal deactuation point screw and internal actuation point screw

Contact Load Current Rating

unable to decode

Contact Voltage Rating In Volts

unable to decode

Features Provided

electrical access port

Longest Horizontal Distance Between Mounting Centers

4.219 inches nominal

Longest Vertical Distance Between Mounting Centers

1.875 inches nominal

Media For Which Designed

gas or liquid

Mounting Facility Pattern

two position diagonal

Mounting Method

base and unthreaded hole(s)

Nonpile-Up Contact Arrangement

1 pole, double throw, one position momentary

Overall Height

6.938 inches nominal

Overall Length

3.188 inches nominal

Overall Width

1.531 inches nominal

Style Designator

rectangular

Temp Sensing Element Type

capillary tube-bulb

Terminal Type

screw

Unthreaded Mounting Hole Diameter

0.190 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000451

Cross Reference

CAGE Codes

88234

United Electric Controls Company

U.s./canadian manufacturers

96101

Gas Equipment Engineering Corporation, The Dba Geeco

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

9032-10-0000

Description

thermostats

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87461

(NAICS) North American Industrial Classification System

334512

Questions & Answers

1. What is the FSCG of the NSN 5930-01-073-2410?

   The FSCG of the NSN 5930-01-073-2410 is 5930

2. Does the NSN 5930-01-073-2410 have a Schedule B code assigned?

   Yes, the Schedule B code is 9032100000

3. Does NSN 5930-01-073-2410 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-073-2410 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-01-073-2410 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-073-2410 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Tue, Mar 13, 1979