NSN FA3035

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

trip-reset actuator function, 6.000 inches nominal body length, magnetic blowout arc quenching method, at pole two actuator position designation, 3.375 inches nominal body height.

NSN 5925-00-458-6646 Datasheet

(NSN) National Stock Number

5925-00-458-6646

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

00-458-6646

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Fri, Dec 26, 1969

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole two

Arc Quenching Method

magnetic blowout

Body Height

3.375 inches nominal

Body Length

6.000 inches nominal

Body Style

multipole-single actuator type

Body Width

4.125 inches nominal

Boss Height

0.125 inches nominal

Center To Center Distance Between Terminals Parallel To Length

5.062 inches nominal

Center To Center Distance Between Terminals Parallel To Width

1.375 inches nominal

Circuit Protection Type

overcurrent all locations

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

4.500 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.375 inches nominal

Fragility Factor

moderately rugged

Frequency In Hertz

60.0 all locations

Inclosure Protection Type For Which Designed

fungus resistant

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 toggle

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

35.0 amperes ac and 35.0 amperes dc all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

10000.0 ac and 10000.0 dc all locations

Mounting Facility Type And Quantity

4 unthreaded hole(s)

Operating Voltage Type And Rating Per Pole In Volts

600.0 ac and 250.0 dc all locations

Pole Quantity

3

Reset Method

manual

Storage Type

general purpose warehouse

Terminal Type And Quantity

6 screw

Trip Release Ambient Temp Rating

40.0 celsius nominal all locations

Trip Release Characteristic

instantaneous and time delay all locations

Trip Release Method

thermal-magnetic all locations

Trip Delay Time In Seconds Per Rated Continuous Current

20.000 minimum at 200 pct and 60.000 maximum at 200 pct all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 all locations

Unthreaded Mounting Hole Diameter

0.188 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

89946

Eaton Corporation Dba Eaton Inoac

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-00-458-6646?

   The FSCG of the NSN 5925-00-458-6646 is 5925

2. Does the NSN 5925-00-458-6646 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-00-458-6646 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-00-458-6646 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-00-458-6646 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-00-458-6646 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Fri, Dec 26, 1969