NSN FAF802

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

0.525 inches nominal body height, discrimination at specified frequencies per function in decibels, 2.250 inches maximum body length, 0.800 inches maximum body width, metal body material.

NSN 5915-01-101-0817 Datasheet

(NSN) National Stock Number

5915-01-101-0817

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

01-101-0817

Requires Demilitarization

Yes

(INC) Item Name Code

13911

Date

Fri, Sep 19, 1980

Schedule B Code

8527995030

Body Height

0.525 inches nominal

Body Length

2.250 inches maximum

Body Material

metal

Body Width

0.800 inches maximum

Discrimination At Specified Frequencies Per Function In Decibels

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.300 inches nominal

Frequency Band Width Per Function

1.00 kilohertz blank and 15.00 kilohertz blank

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

hermetically sealed

Insertion Loss At Reference Frequency Per Function In Decibels

1.0 blank

Load Impedance Per Function

3.0 kilohms blank

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

2 threaded stud(s)

Nominal Thread Size

0.112 inches

Operating Temp Range

-54.0 to 125.0 celsius

Overall Height

0.569 inches nominal

Reference Frequency Per Function

7.5 kilohertz blank

Source Impedance Rating Per Function

3.0 kilohms blank

Specified Frequencies Of Discrimination Per Function

1.00 kilohertz blank and 15.00 kilohertz blank and 250.00 kilohertz blank and 500.00 kilohertz blank

Style Designator

rectangular terminal/terminals on one surface

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0013911

Cross Reference

CAGE Codes

06978

Vernitron Corp Aie Magnetics Div

U.s./canadian manufacturers

00222

Esc Control Electronics Llc Dba Control Electronics Division of Fil-Coil

U.s./canadian manufacturers

00144

Te Connectivity Networks, Inc. Div Adc Telecommunications Sales, Inc.

U.s./canadian manufacturers

13499

Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems

U.s./canadian manufacturers

15634

Magnetika Inc

U.s./canadian manufacturers

80223

United Transformer Corp Sub of Opt Industries Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

21275

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

069100

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-01-101-0817?

   The FSCG of the NSN 5915-01-101-0817 is 5915

2. Does the NSN 5915-01-101-0817 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-01-101-0817 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5915-01-101-0817 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5915-01-101-0817 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-01-101-0817 was assigned to the Federal Catalog?

   It was assigned 46 years ago, on Fri, Sep 19, 1980