NSN FB00KBY

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

f16aircombfit e/i fscm 14933 end item identification.

NSN 5945-01-455-5269 Datasheet

(NSN) National Stock Number

5945-01-455-5269

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

01-455-5269

Requires Demilitarization

Yes

(INC) Item Name Code

31446

Date

Wed, May 6, 1998

End Item Identification

f16aircombfit e/i fscm 14933

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0031446

Cross Reference

CAGE Codes

037Z3

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings)

Government departments or units, including military organizations

16170

Teledyne Technologies Incorporated Dba Teledyne Microelectronic Technologies Div Teledyne Microelectronics

Non-manufacturers

31338

Semitronics Corp

U.s./canadian manufacturers

31757

Micropac Industries Inc

U.s./canadian manufacturers

63745

Teledyne Solid State Products Div Teledyne Industries Sub of Teledyne Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Questions & Answers

1. What is the FSCG of the NSN 5945-01-455-5269?

   The FSCG of the NSN 5945-01-455-5269 is 5945

2. Does NSN 5945-01-455-5269 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5945-01-455-5269 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5945-01-455-5269 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5945-01-455-5269 was assigned to the Federal Catalog?

   It was assigned 28 years ago, on Wed, May 6, 1998