NSN FC1055

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

0.113 inches nominal blade tip width, 0.437 inches nominal blade length, woodson design designation, 0.029 inches nominal blade tip thickness, angular blade shape.

NSN 6520-00-536-5350 Datasheet

(NSN) National Stock Number

6520-00-536-5350

(FSG) Federal Supply Group

65 - Medical, Dental, and Veterinary Equipment and Supplies

(FSC) Federal Supply Classification

6520 - Supplies, Equipment and Dental Instruments

(NIIN) National Item Identification Number

00-536-5350

Requires Demilitarization

Yes

(INC) Item Name Code

13016

Date

Tue, Jan 1, 1963

Schedule B Code

9018490000

Blade Length

0.437 inches nominal

Blade Shape

angular

Blade Tip Thickness

0.029 inches nominal

Blade Tip Width

0.113 inches nominal

Design Designation

woodson

Double End Feature

included

Part Name Assigned By Controlling Agency

"plugger plastic filling dental cres or brass woodson 1 7"o/a lg"

Pattern/Style Identification

1

Material

steel corrosion resisting or copper alloy and nickel handle

Material

steel corrosion resisting point

Nondefinitive Spec/Std Data

2 class and iii type and 1 style

Overall Length

7.000 inches nominal

Special Features

one or three piece construction; alternate material chrome plated brass for handle; operative ends and handle passivated; double ended; finger grip shall be serrated or knurled

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0013016

Cross Reference

CAGE Codes

13099

Hu Friedy Manufacturing Co., Llc Dba Use Cage Code 29685 for Cataloging

U.s./canadian manufacturers

55187

Sklar Corporation Dba Sklar Instruments

U.s./canadian manufacturers

29685

Hu-Friedy Mfg. Co., Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

MZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

651 - Instruments, medical and surgical

National Motor Freight Classification Item Number

056590

Schedule B & Trade

Schedule B

9018-49-0000

Description

other instruments and appliances, used in dental sciences; and parts and accessories, except dental drill engines, nesoi

End Use

21610 - Medicinal equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87219

(NAICS) North American Industrial Classification System

339114

Questions & Answers

1. What is the FSCG of the NSN 6520-00-536-5350?

   The FSCG of the NSN 6520-00-536-5350 is 6520

2. Does the NSN 6520-00-536-5350 have a Schedule B code assigned?

   Yes, the Schedule B code is 9018490000

3. Does NSN 6520-00-536-5350 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6520-00-536-5350 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6520-00-536-5350 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6520-00-536-5350 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963