1. Home /
  2. FSC NSN Catalog /
  3. Relays and Solenoids /
  4. FC404-2

NSN FC404-2

Electromagnetic Relay

air arc quenching method, unable to decode center to center distance between mounting facilities parallel to length, unable to decode center to center distance between mounting facilities parallel to width, 1 coil quantity, 3.783 cubic inches cubic measure.

NSN 5945-00-818-8904 Datasheet

(NSN) National Stock Number
5945-00-818-8904
(FSC) Federal Supply Classification
5945 - Relays and Solenoids
(NIIN) National Item Identification Number
00-818-8904
Requires Demilitarization
Yes
(INC) Item Name Code
32512
Date
Tue, Jan 1, 1963
Schedule B Code
8536490050
Arc Quenching Method
air
Center To Center Distance Between Mounting Facilities Parallel To Width
unable to decode
Center To Center Distance Between Mounting Facilities Parallel To Length
unable to decode
Coil Quantity
1
Cubic Measure
3.783 cubic inches
Duty Type
continuous
Environmental Protection
hermetic
Fragility Factor
moderately rugged
Frequency In Hertz
400.0 nominal
Main Contact Load Current Rating At Maximum Rated Voltage
Main Contact Maximum Voltage Rating In Volts
115.0 ac and 28.0 dc
Mounting Facility Pattern
unable to decode
Mounting Facility Type And Quantity
4 threaded stud(s) single mounting facility
Nominal Thread Size
unable to decode
Nonpile-Up Main Contact Arrangement
4 pole, double throw, one position momentary
Operating Voltage Rating And Type At Specified Temp
unable to decode
Overall Height
2.187 inches maximum
Overall Length
1.531 inches maximum
Overall Width
1.130 inches maximum
Purpose For Which Designed
general
Specification/Standard Data
96906-ms25267 government standard
Storage Type
general purpose warehouse
Terminal Type And Quantity
unable to decode
Test Data Document
"81349-mil-r-6106 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Thread Class
unable to decode
Thread Direction
unable to decode
Thread Quantity Per Inch
unable to decode
Thread Series Designator
unable to decode
Time Delay
unable to decode
Winding Quantity
1

Identification

Demilitarization Code
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Precious Metals Indicator
A - Item does not contain precious metal.
Hazardous Metals Indicator
N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Pseudo Item Name Code
0032512

Cross Reference

CAGE Codes

31361
Woodward, Inc.
U.s./canadian manufacturers
19823
Hurletronaltair Inc
U.s./canadian manufacturers
24727
Seacon Brantner & Associates Dba Seacon Giannini
U.s./canadian manufacturers
53711
Naval Sea Systems Command
U.s./canadian manufacturers
03481
Bfgoodrich Co the Aerospace Div Engineered Polymer Products
U.s./canadian manufacturers
9009H
Jednolity Indeks Materialowy - Uniform Material Index
Government departments or units, including military organizations
58657
Leach International Corp Div Leach International Corporation
U.s./canadian manufacturers
78290
Struthers-Dunn Inc
U.s./canadian manufacturers
24930
L3harris Technologies, Inc Div Space & Airborne Systems
U.s./canadian manufacturers
81349
Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
Military standards and standards organizations (ex:stanags,milspecs,defstans)
96906
Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M
Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity
HZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Less than Carload Rating
P - 77.5
National Motor Freight Class Rating
M - 85.0
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
34430
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
National Motor Freight Classification Item Number
061360

Schedule B & Trade

Schedule B
8536-49-0050
Description
relays, electromechanical, with contacts rated at less than 10 a, for a voltage exceeding 60 v but not exceeding 1000 v
End Use
20005 - Electric apparatus
Unit of Quantity
NO
USDA
Yes
(SITC) Standard International Trade Classification
77254
(NAICS) North American Industrial Classification System
335314

Questions & Answers

  1. What is the FSCG of the NSN 5945-00-818-8904?

    The FSCG of the NSN 5945-00-818-8904 is 5945

  2. Does the NSN 5945-00-818-8904 have a Schedule B code assigned?

    Yes, the Schedule B code is 8536490050

  3. Does NSN 5945-00-818-8904 require demilitarization?

    Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

  4. Does NSN 5945-00-818-8904 contain precious materials?

    Item does not contain precious metal.

  5. Does NSN 5945-00-818-8904 contain hazardous materials?

    Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

  6. When the NSN 5945-00-818-8904 was assigned to the Federal Catalog?

    It was assigned 63 years ago, on Tue, Jan 1, 1963

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.