NSN FD12COG2D290G

An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes:items with more than one hole. See also insulator, disk; insulator, bead; insulator, bushing; and insulator, plate

0.125 inches maximum body height, 29.000 picofarads single section capacitance value per section, 0.200 inches maximum body width, w/o mtg facilities terminal(s) on one surface body style, 0.200 inches maximum body length.

NSN 5910-01-245-6428 Datasheet

(NSN) National Stock Number

5910-01-245-6428

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-245-6428

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Wed, Dec 3, 1986

Schedule B Code

8532290040

Body Height

0.125 inches maximum

Body Length

0.200 inches maximum

Body Width

0.200 inches maximum

Body Style

w/o mtg facilities terminal(s) on one surface

Capacitance Value Per Section

29.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Length

0.100 inches nominal

Insulation Resistance At Reference Temp

10000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

200.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

0.0 single section

Terminal Diameter

0.020 inches nominal

Terminal Length

1.250 inches nominal

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-2.00 to 2.00 percent single section

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-30.0 to 30.0 single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

1LQK8

Keysight Technologies, Inc.

U.s./canadian manufacturers

28480

Hewlett-Packard Company Dba Hp

U.s./canadian manufacturers

7ZXR5

Keysight Technologies Inc

U.s./canadian manufacturers

59660

Tusonix, Llc

U.s./canadian manufacturers

J3582

Tdk-Lambda Corporation

Non-us manufacturer (nato), other foreign organization or codification bureaus

S5988

Tdk-Lambda Corporation

Non-us manufacturer (nato), other foreign organization or codification bureaus

51406

Murata Erie North America Inc Headquarters and Georgia Opns

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-245-6428?

   The FSCG of the NSN 5910-01-245-6428 is 5910

2. Does the NSN 5910-01-245-6428 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-245-6428 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-245-6428 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-245-6428 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-245-6428 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Wed, Dec 3, 1986