NSN FD3035V

A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. Excludes:transformer (1), pulse.

magnetic blowout arc quenching method, trip-reset actuator function, 3.375 inches nominal body height, 6.000 inches nominal body length, at pole two actuator position designation.

NSN 5925-00-174-6328 Datasheet

(NSN) National Stock Number

5925-00-174-6328

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

00-174-6328

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Sun, Jan 1, 1961

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole two

Arc Quenching Method

magnetic blowout

Body Height

3.375 inches nominal

Body Length

6.000 inches nominal

Body Style

multipole-single actuator type

Body Width

4.125 inches nominal

Boss Height

0.125 inches nominal

Center To Center Distance Between Terminals Parallel To Length

5.062 inches nominal

Center To Center Distance Between Terminals Parallel To Width

1.375 inches nominal

Circuit Protection Type

overcurrent all locations

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

4.500 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.375 inches nominal

Fragility Factor

moderately rugged

Frequency In Hertz

60.0 all locations

Inclosure Protection Type For Which Designed

general purpose

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 toggle

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

35.0 amperes ac all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

15000.0 ac all locations

Mounting Facility Type And Quantity

4 unthreaded hole(s)

Operating Voltage Type And Rating Per Pole In Volts

600.0 ac all locations

Pole Quantity

3

Reset Method

manual

Special Handling Feature

magnetic

Storage Type

general purpose warehouse

Terminal Type And Quantity

6 compression

Trip Delay Time In Seconds Per Rated Continuous Current

50.000 minimum at 200 pct and 220.000 maximum at 200 pct all locations

Trip Release Ambient Temp Rating

40.0 celsius nominal all locations

Trip Release Characteristic

instantaneous and time delay all locations

Trip Release Method

thermal-magnetic all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 all locations

Unthreaded Mounting Hole Diameter

0.187 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

79500

Westinghouse Electric Corp

U.s./canadian manufacturers

60969

General Electric Co Electrical Distribution and Control

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-00-174-6328?

   The FSCG of the NSN 5925-00-174-6328 is 5925

2. Does the NSN 5925-00-174-6328 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-00-174-6328 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-00-174-6328 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5925-00-174-6328 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-00-174-6328 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961