NSN FDB34-036

Two or more sizes and/or types of shims packaged or grouped for issue for complete one-time replacement. See also shim assortment.

1 individual section quantity, breaks before makes single section front contact switching action, 0.375 inches single mounting facility nominal thread size, threaded bushing single mounting facility mounting method, 0.531 inches nominal at 9:00 oclock nonturn device radius.

NSN 5930-01-048-8792 Datasheet

(NSN) National Stock Number

5930-01-048-8792

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-048-8792

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Fri, Oct 7, 1977

Contact Switching Action

breaks before makes single section front

Individual Section Quantity

1

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Radius

0.531 inches nominal at 9:00 oclock

Nonturn Device Type

flatted bushing at 12:00 oclock

Nonturn Device Type

tab at 9:00 oclock

Overall Width

1.271 inches minimum and 1.291 inches maximum

Pole Quantity

3 single section front

Shaft Diameter

0.248 inches minimum and 0.251 inches maximum single actuator

Shaft Type

round single actuator

Shaft Length

0.375 inches nominal single actuator

Style Designator

circular wafer, bushing mount

Switch Actuator Indexing Position Quantity

4 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Length

0.375 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

4 single section front

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

81840

Saia-Burgess, Inc.

U.s./canadian manufacturers

80103

Veeco Instruments Inc Lambda Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Questions & Answers

1. What is the FSCG of the NSN 5930-01-048-8792?

   The FSCG of the NSN 5930-01-048-8792 is 5930

2. Does NSN 5930-01-048-8792 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5930-01-048-8792 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5930-01-048-8792 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5930-01-048-8792 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Fri, Oct 7, 1977