NSN FDC2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

hub drilled and tapped all entrance conduit entrance type, ridged cover mounting surface type, as modified by material departure from cited designator, rigid metallic thickwall all entrance conduit type accommodated, 0.750 inches all entrance conduit trade size accommodated.

NSN 5975-00-494-0600 Datasheet

(NSN) National Stock Number

5975-00-494-0600

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

00-494-0600

Requires Demilitarization

Yes

(INC) Item Name Code

06945

Date

Tue, Jan 1, 1963

Schedule B Code

8543909000

Conduit Entrance Type

hub drilled and tapped all entrance

Conduit Trade Size Accommodated

0.750 inches all entrance

Conduit Type Accommodated

rigid metallic thickwall all entrance

Cover Mounting Surface Type

ridged

Departure From Cited Designator

as modified by material

Depth

2.688 inches nominal

Hazardous Locations/Environmental Protection

not rated

Length

4.281 inches nominal

Material

iron overall

Nondefinitive Spec/Std Data

8 design and 1 form and c style and 0.750 inch size and 2 type

Style Designator

rectangular 2 entrances

Surface Treatment

cadmium and zinc overall

Trade Designation

fdc series

Width

2.750 inches nominal

Wiring Device Gang Quantity

1

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0006945

Cross Reference

CAGE Codes

58536

Federal Commercial Item Description Promulgated by General Services Administration Washington Dc

Military standards and standards organizations (ex:stanags,milspecs,defstans)

15235

Crouse-Hinds Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5975-00-494-0600?

   The FSCG of the NSN 5975-00-494-0600 is 5975

2. Does the NSN 5975-00-494-0600 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5975-00-494-0600 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5975-00-494-0600 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5975-00-494-0600 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5975-00-494-0600 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963