NSN FEDWC586TYPE1DESIGN1STYLET

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

hub drilled and tapped all entrance conduit entrance type, flat cover mounting surface type, 3.125 inches nominal cover opening length, rigid metallic thickwall all entrance conduit type accommodated, 0.500 inches all entrance conduit trade size accommodated.

NSN 5975-00-080-2706 Datasheet

(NSN) National Stock Number

5975-00-080-2706

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

00-080-2706

Requires Demilitarization

Yes

(INC) Item Name Code

06945

Date

Tue, Jan 1, 1963

Schedule B Code

8543909000

Conduit Entrance Type

hub drilled and tapped all entrance

Conduit Trade Size Accommodated

0.500 inches all entrance

Conduit Type Accommodated

rigid metallic thickwall all entrance

Cover Mounting Surface Type

flat

Cover Opening Length

3.125 inches nominal

Cover Opening Width

0.938 inches nominal

Cover Quantity

1

Functional Cover Style

single interchangeable device

Hazardous Locations/Environmental Protection

not rated

Material

iron overall

Nondefinitive Spec/Std Data

1 design and ta style and i type

Style Designator

oblong

Trade Designation

ta

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9G - Defense supply center richmond, virginia 23297

Pseudo Item Name Code

0006945

Cross Reference

CAGE Codes

81348

Federal Specifications Promulgated by General Services Administration Washington Dc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34496

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

062010

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5975-00-080-2706?

   The FSCG of the NSN 5975-00-080-2706 is 5975

2. Does the NSN 5975-00-080-2706 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5975-00-080-2706 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5975-00-080-2706 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5975-00-080-2706 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5975-00-080-2706 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963