NSN FH36090

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

multipole-single actuator type body style, 6.000 inches nominal body length, trip-reset actuator function, 3.160 inches nominal body height, at pole two actuator position designation.

NSN 5925-01-291-0712 Datasheet

(NSN) National Stock Number

5925-01-291-0712

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-291-0712

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Thu, Dec 22, 1988

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole two

Body Height

3.160 inches nominal

Body Length

6.000 inches nominal

Body Style

multipole-single actuator type

Body Width

4.500 inches nominal

Boss Height

0.140 inches nominal

Center To Center Distance Between Terminals Parallel To Length

5.130 inches nominal

Center To Center Distance Between Terminals Parallel To Width

0.750 inches nominal

Circuit Protection Type

overcurrent all locations

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

5.130 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.500 inches nominal

Frequency In Hertz

60.0 all locations

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 toggle

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

90.0 amperes ac and 90.0 amperes dc all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

18000.0 ac and 10000.0 dc all locations

Mounting Facility Type And Quantity

4 unthreaded hole(s)

Operating Voltage Type And Rating Per Pole In Volts

600.0 ac and 250.0 dc all locations

Pole Quantity

3

Reset Method

manual

Terminal Type And Quantity

6 compression

Trip Release Ambient Temp Rating

75.0 celsius nominal all locations

Trip Release Characteristic

instantaneous all locations

Trip Release Method

thermal-magnetic all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 all locations

Unthreaded Mounting Hole Diameter

0.138 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

14280

Schneider Electric Usa, Inc. Dba Schneider Electric

U.s./canadian manufacturers

51918

Schneider Electric Usa, Inc.

U.s./canadian manufacturers

63637

Schneider Electric Usa, Inc. Dba Schneider Electric

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-291-0712?

   The FSCG of the NSN 5925-01-291-0712 is 5925

2. Does the NSN 5925-01-291-0712 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-291-0712 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-291-0712 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-291-0712 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-291-0712 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Thu, Dec 22, 1988