NSN FHL29G6

1.250 inches nominal accommodated fuse length, 0.464 inches minimum and 0.474 inches maximum center to center distance between keyway and bushing hole, 0.869 inches minimum and 0.879 inches maximum bushing hole diameter, 0.250 inches nominal accommodated ferrule diameter, panel mounted type body style.

NSN 5920-00-421-0952 Datasheet

(NSN) National Stock Number

5920-00-421-0952

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5920 - Fuses, Arrestors, Absorbers and Protectors

(NIIN) National Item Identification Number

00-421-0952

Requires Demilitarization

Yes

(INC) Item Name Code

28909

Date

Wed, Mar 19, 1969

Schedule B Code

8548900100

Accommodated Ferrule Diameter

0.250 inches nominal

Accommodated Fuse Length

1.250 inches nominal

Body Style

panel mounted type

Bushing Hole Diameter

0.869 inches minimum and 0.879 inches maximum

Center To Center Distance Between Keyway And Bushing Hole

0.464 inches minimum and 0.474 inches maximum

Center To Center Distance Between Bushing Holes

0.795 inches minimum and 0.805 inches maximum

Center To Center Distance Between Outside Mounting Holes Along Width

0.933 inches minimum and 0.943 inches maximum

Current Carrying Rating In Amps

30.0

Environmental Protection

dripproof

Fuse Accommodation Quantity

2

Fuse Terminal Type Accommodated

ferrule

Indicating Lamp Voltage Range In Volts

+81.0 to 90.0

Interruption Indicator Method

incandescent lamp

Length From Front Protrusion To Mounting Surface

0.798 inches minimum and 0.828 inches maximum

Material Document And Classification

mil-m-14, type sdg mil spec single material response body

Material

plastic polyhexamethylene adipamide and glass or plastic polycaprolactam and glass or plastic polyhexamethylene sebacamide and glass body

Mounting Hole Diameter

0.151 inches minimum and 0.161 inches maximum

Mounting Hole Quantity

2

Mounting Hole Style

2 bushing mounting w/2 holes

Overall Height

1.812 inches minimum and 1.817 inches maximum

Overall Length

3.750 inches minimum and 4.000 inches maximum

Overall Width

1.180 inches minimum and 1.185 inches maximum

Precious Material And Location

contact surfaces silver

Precious Material

silver

Resistor Rating

2.0 kilohms

Screw Thread Diameter

0.164 inches nominal

Screw Thread Quantity Per Inch

32.0

Specification/Standard Data

81349-mil-f-19207/18 government specification

Surface Treatment Document And Classification

qq-s-365 fed spec single treatment response contact

Surface Treatment

silver contact

Terminal Type And Quantity

4 threaded stud

Test Data Document

"81349-mil-f-19207 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Voltage In Volts

90.0

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0028909

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Questions & Answers

1. What is the FSCG of the NSN 5920-00-421-0952?

   The FSCG of the NSN 5920-00-421-0952 is 5920

2. Does the NSN 5920-00-421-0952 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5920-00-421-0952 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5920-00-421-0952 contain precious materials?

   Item contains silver.

5. Does NSN 5920-00-421-0952 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5920-00-421-0952 was assigned to the Federal Catalog?

   It was assigned 57 years ago, on Wed, Mar 19, 1969