NSN FV53224

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

10.0 continuous current rating in amps, 1.875 inches nominal body length, 0.562 inches nominal body diameter, w/thd bushing mtg, terminals on opposite ends body style, 0.220 microfarads single section capacitance value per section.

NSN 5910-00-803-2900 Datasheet

(NSN) National Stock Number

5910-00-803-2900

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-803-2900

Requires Demilitarization

Yes

(INC) Item Name Code

00003

Date

Mon, Jan 1, 1962

Schedule B Code

8532250080

Body Diameter

0.562 inches nominal

Body Length

1.875 inches nominal

Body Style

w/thd bushing mtg, terminals on opposite ends

Capacitance Value Per Section

0.220 microfarads single section

Continuous Current Rating In Amps

10.0

Dissipation Factor At Reference Temp In Percent

1.0000

Features Provided

hermetically sealed case

Insulation Resistance At Maximum Operating Temp

10.0 megohm-microfarads

Insulation Resistance At Reference Temp

18000.0 megohms

Mounting Facility Screw Thread Series Designator

unf

Mounting Facility Type And Quantity

1 threaded bushing

Nominal Thread Size

0.312 inches

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

400.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

feedthrough

Terminal Type And Quantity

2 uninsulated wire lead w/terminal lug

Test Data Document

"81349-mil-c-11693/7 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000003

Cross Reference

CAGE Codes

49956

Raytheon Company Div Corp

U.s./canadian manufacturers

0NKU0

Lct Electronics

U.s./canadian manufacturers

98436

Lakeside Malleable Castings Co

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

81831

Filtron Co Inc Div of Rfi Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-803-2900?

   The FSCG of the NSN 5910-00-803-2900 is 5910

2. Does the NSN 5910-00-803-2900 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-00-803-2900 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-803-2900 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-803-2900 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-803-2900 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962