NSN G03C034-PP

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

0.281 inches nominal mounting hole diameter, astm a47 assn std 1st material response or qq-s-681f fed spec 2nd material response material document and classification, 2 mounting hole quantity, iron cast or steel material, notched slide features provided.

NSN 5340-01-558-7514 Datasheet

(NSN) National Stock Number

5340-01-558-7514

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-558-7514

Requires Demilitarization

Yes

(INC) Item Name Code

38089

Date

Tue, Nov 20, 2007

Features Provided

notched slide

Material Document And Classification

astm a47 assn std 1st material response or qq-s-681f fed spec 2nd material response

Material

iron cast or steel

Mounting Hole Quantity

2

Mounting Hole Diameter

0.281 inches nominal

Mounting Hole Type

plain

Overall Height

0.782 inches minimum and 0.842 inches maximum

Overall Length

1.657 inches minimum and 1.717 inches maximum

Overall Width

1.970 inches minimum and 2.030 inches maximum

Surface Treatment Document And Classification

mil-f-14072, -225 mil std single treatment response

Surface Treatment

passivate and cadmium and chromate

Special Features

top of bracket arm coarse diamond knurled; end of bracket arm has 0.377 in dia circle with 2 flatened sides; circle goes through the bracket arm

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0038089

Cross Reference

CAGE Codes

4Y759

Global Market Development Inc Div Accusonic Voice Systems

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 5340-01-558-7514?

   The FSCG of the NSN 5340-01-558-7514 is 5340

2. Does NSN 5340-01-558-7514 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-558-7514 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-558-7514 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-558-7514 was assigned to the Federal Catalog?

   It was assigned 18 years ago, on Tue, Nov 20, 2007