NSN GF7879

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

10000.0 average life rating in hours, 6.900 inches nominal body length, 3.500 inches nominal body height, 4.700 inches nominal body width, 7.437 inches nominal distance between centerlines of mounting facilities parallel to body length.

NSN 5915-00-221-9610 Datasheet

(NSN) National Stock Number

5915-00-221-9610

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

00-221-9610

Requires Demilitarization

Yes

(INC) Item Name Code

00765

Date

Wed, May 9, 1973

Schedule B Code

8527995030

Average Life Rating In Hours

10000.0

Body Height

3.500 inches nominal

Body Length

6.900 inches nominal

Body Width

4.700 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

7.437 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

3.500 inches nominal

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

encased

Input Impedance Per Function W/Load

unable to decode

Maximum Dielectric Withstanding Dc Voltage

600.0 volts at sea level

Mounting Facility Type And Quantity

6 unthreaded hole(s)

Operating Current Rating Per Function In Amps

unable to decode

Operating Temp Range

-54.0 to 65.0 celsius

Operating Voltage Rating And Type Per Function

unable to decode

Output Impedance Per Function W/Source Across Input

unable to decode

Power Line Frequency Rating Per Function In Hertz

unable to decode

Principal Circuitry Type Per Function

unable to decode

Unthreaded Mounting Hole Diameter

0.205 inches nominal

Vibration Resistance Range In Hertz

+10.0 to 55.0

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000765

Cross Reference

CAGE Codes

24930

L3harris Technologies, Inc Div Space & Airborne Systems

U.s./canadian manufacturers

07294

Genisco Filter Corp

U.s./canadian manufacturers

13050

Spectrum Control, Inc. Div Api Technologies - Eis/wesson

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58500

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061990

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-00-221-9610?

   The FSCG of the NSN 5915-00-221-9610 is 5915

2. Does the NSN 5915-00-221-9610 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-00-221-9610 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5915-00-221-9610 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5915-00-221-9610 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-00-221-9610 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Wed, May 9, 1973