NSN GPRS2

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

radar set, firefinder (an/tpq-36). end item identification, 0.156 inches nominal actuator diameter, 0.531 inches nominal actuator height, round actuator style, 0.513 inches nominal actuator free position height.

NSN 5930-00-504-6674 Datasheet

(NSN) National Stock Number

5930-00-504-6674

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-504-6674

Requires Demilitarization

Yes

(INC) Item Name Code

00399

Date

Tue, Jan 1, 1963

Schedule B Code

8536509050

End Item Identification

radar set, firefinder (an/tpq-36).

Actuator Height

0.531 inches nominal

Actuator Diameter

0.156 inches nominal

Actuator Free Position Height

0.513 inches nominal

Actuator Style

round

Actuator Movement

0.062 overtravel inches nominal and 0.001 differential inches nominal

Body Style

hole mounted

Center To Center Distance Between Housing Mounting Facilities Parallel To Width

1.375 inches nominal

Contact Load Current Rating At Maximum Rated Voltage

10.000 amperes resistive ac

Criticality Code Justification

feat

Housing Height

1.312 inches nominal

Housing Length

2.125 inches nominal

Housing Width

0.875 inches nominal

Inclosure Type

fully inclosed

Maximum Voltage Rating In Volts

125.0 ac

Nonpile-Up Contact Arrangement

unable to decode

Special Features

weapon system essential

Switch Release Force

3.0 ounces minimum and 4.0 ounces maximum

Switch Actuating Force

12.0 ounces minimum and 14.0 ounces maximum

Terminal Type And Quantity

2 wire lead

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000399

Cross Reference

CAGE Codes

19204

Army, United States Department of the Dba Rock Island Arsenal Jmtc

Non-manufacturers

64959

American Telephone and Telegraph Co

U.s./canadian manufacturers

91929

Honeywell International Inc. Dba Honeyweel Sensing & Controls

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9050

Description

switches, slide, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-504-6674?

   The FSCG of the NSN 5930-00-504-6674 is 5930

2. Does the NSN 5930-00-504-6674 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509050

3. Does NSN 5930-00-504-6674 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-504-6674 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-504-6674 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-504-6674 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963