NSN HB080

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

nonrenewable fusible element features provided, normal instantaneous circuit over-current interruption type, 1.000 inches nominal center to center distance between mounting facilities parallel to length, tangent terminal type body style, 80.000 continuous current rating in amps.

NSN 5920-00-845-1679 Datasheet

(NSN) National Stock Number

5920-00-845-1679

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5920 - Fuses, Arrestors, Absorbers and Protectors

(NIIN) National Item Identification Number

00-845-1679

Requires Demilitarization

Yes

(INC) Item Name Code

00248

Date

Tue, Jan 1, 1963

Body Style

tangent terminal type

Center To Center Distance Between Mounting Facilities Parallel To Length

1.000 inches nominal

Circuit Over-Current Interruption Type

normal instantaneous

Continuous Current Rating In Amps

80.000

Features Provided

nonrenewable fusible element

Interruption Indicator Method

opaque body

Maximum Voltage Rating In Volts

32.0 ac and 32.0 dc

Mounting Slot Width

0.260 inches nominal

Overall Diameter

0.812 inches nominal

Overall Length

1.750 inches nominal

Overall Width

1.312 inches nominal

Terminal Thickness

0.047 inches minimum

Test Data Document

"81349-milf15160/40 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000248

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

71400

Cooper Bussmann, Llc Dba Cooper Industries

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

J - 100.0

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34740

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

062060

Questions & Answers

1. What is the FSCG of the NSN 5920-00-845-1679?

   The FSCG of the NSN 5920-00-845-1679 is 5920

2. Does NSN 5920-00-845-1679 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5920-00-845-1679 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5920-00-845-1679 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5920-00-845-1679 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963