NSN HLT114-5-6

An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as fuseholder; holder, resistor; fanning strip; contact assembly, electrical; jack assembly, tip; chamber, cable terminal; panel (2) (as modified); connector (as modified). Excludes:terminal, stud; terminal, feedthru, insulated; post, binding, electrical; and chassis, electrical-electronic equipment. For items having printed electrical conductor paths, see printed wiring board.

flat chamfer head style, 0.385 inches maximum grip length, 0.037 inches minimum and 0.047 inches maximum head height, 0.242 inches minimum and 0.262 inches maximum head major diameter, 0.677 inches minimum and 0.697 inches maximum fastener length.

NSN 5320-01-237-9404 Datasheet

(NSN) National Stock Number

5320-01-237-9404

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5320 - Rivets

(NIIN) National Item Identification Number

01-237-9404

Requires Demilitarization

Yes

(INC) Item Name Code

67165

Date

Thu, Aug 7, 1986

Schedule B Code

7318230000

Fastener Length

0.677 inches minimum and 0.697 inches maximum

Grip Length

0.385 inches maximum

Head Height

0.037 inches minimum and 0.047 inches maximum

Head Style

flat chamfer

Head Major Diameter

0.242 inches minimum and 0.262 inches maximum

Lubrication

cetyl alcohol, spec 305, hi-shear corp

Material Document And Classification

Material

Minimum Tensile Strength

180000 pounds per square inch

Nominal Thread Size

0.164 inches

Shank Diameter

0.1625 inches minimum and 0.1635 inches maximum

Shank Style

pin-rivet, straight, threaded

Shear Strength

108000 single pounds per square inch

Surface Treatment Document And Classification

unable to decode

Surface Treatment

Thread Class

3a

Thread Direction

right-hand

Thread Quantity Per Inch

32

Thread Series Designator

unjc

Width Between Flats

0.0791 inches minimum and 0.0801 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0067165

Cross Reference

CAGE Codes

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

06725

Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company

U.s./canadian manufacturers

06950

Howmet Global Fastening Systems Inc

U.s./canadian manufacturers

12733

Vsi Corp Sub of Fairchild Industries Inc

U.s./canadian manufacturers

17446

Huck International, Inc

U.s./canadian manufacturers

56878

Sps Technologies, Llc Dba Pb Fasteners

U.s./canadian manufacturers

60516

West Coast Aerospace, Inc.

U.s./canadian manufacturers

73197

Hi-Shear Corporation

U.s./canadian manufacturers

97928

Huck Intl Inc

U.s./canadian manufacturers

L4528

Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

50420

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

096300

Schedule B & Trade

Schedule B

7318-23-0000

Description

rivets of iron or steel

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69422

(NAICS) North American Industrial Classification System

332722

Questions & Answers

1. What is the FSCG of the NSN 5320-01-237-9404?

   The FSCG of the NSN 5320-01-237-9404 is 5320

2. Does the NSN 5320-01-237-9404 have a Schedule B code assigned?

   Yes, the Schedule B code is 7318230000

3. Does NSN 5320-01-237-9404 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5320-01-237-9404 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5320-01-237-9404 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5320-01-237-9404 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Thu, Aug 7, 1986