NSN HLT

An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). Excludes:nut (1), plain, cap. See also turnbuckle body.

1.125 inches nominal body width, 0.453 inches maximum body height, w/mtg hole(s)/slot(s), terminals on opposite surfaces body style, 1.250 inches nominal body length, 28500.000 picofarads single section capacitance value per section.

NSN 5910-00-666-5924 Datasheet

(NSN) National Stock Number

5910-00-666-5924

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-666-5924

Requires Demilitarization

Yes

(INC) Item Name Code

00005

Date

Tue, Jan 1, 1963

Schedule B Code

8532290020

Body Height

0.453 inches maximum

Body Length

1.250 inches nominal

Body Style

w/mtg hole(s)/slot(s), terminals on opposite surfaces

Body Width

1.125 inches nominal

Capacitance Value Per Section

28500.000 picofarads single section

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.312 inches nominal

Material

plastic case

Mounting Facility Type And Quantity

2 unthreaded mounting holes

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

600.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Type And Quantity

2 tab, solder lug

Tolerance Range Per Section

-1.00 to 1.00 percent single section

Unthreaded Mounting Hole Diameter

0.144 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000005

Cross Reference

CAGE Codes

06141

L3 Aviation Products, Inc. Dba L3 Technologies

U.s./canadian manufacturers

10133

Micromatic Textron Inc Sub of Textron Inc

U.s./canadian manufacturers

71400

Cooper Bussmann, Llc Dba Cooper Industries

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0020

Description

fixed capacitors, mica dielectric, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-666-5924?

   The FSCG of the NSN 5910-00-666-5924 is 5910

2. Does the NSN 5910-00-666-5924 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290020

3. Does NSN 5910-00-666-5924 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-666-5924 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-666-5924 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-666-5924 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963