NSN HP6N

An item with a threaded or unthreaded hole specifically designed for use with an exhaust pipe, exhaust pipe connector, companion flange or the like in an engine or heater exhaust system. The face of the flange is normally drilled for connecting bolts and/or studs.

0.491 inches minimum and 0.571 inches maximum center to center distance between loop and mounting hole, 0.420 inches nominal loop inside diameter, 0.173 inches nominal diameter, unable to decode material document and classification, 0.719 inches nominal distance from loop center to tongue end.

NSN 5340-00-975-1440 Datasheet

(NSN) National Stock Number

5340-00-975-1440

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-975-1440

Requires Demilitarization

Yes

(INC) Item Name Code

17532

Date

Sun, May 14, 1972

Schedule B Code

3926909988

Center To Center Distance Between Loop And Mounting Hole

0.491 inches minimum and 0.571 inches maximum

Diameter

0.173 inches nominal

Distance From Loop Center To Tongue End

0.719 inches nominal

Loop Inside Diameter

0.420 inches nominal

Material Document And Classification

unable to decode

Material Thickness

0.045 inches nominal

Material

unable to decode

Overall Width

0.335 inches minimum and 0.415 inches maximum

Style Designator

single loop

Tongue Hole Type

round, unthreaded

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0017532

Cross Reference

CAGE Codes

INTE9

Nato Stock Number Potential Interchangeability Link

Nato allocated special codes (example:iref0,inte9)

20284

Aimtron Systems, Llc

Non-manufacturers

D9182

Zf Industrieantriebe Witten Gmbh

Non-us manufacturer (nato), other foreign organization or codification bureaus

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

80249

Bae Systems Information and Electronic Systems Integration Inc.

U.s./canadian manufacturers

H0203

Thales Nederland

Non-us manufacturer (nato), other foreign organization or codification bureaus

06845

Raytheon Company Dba Raytheon Co

U.s./canadian manufacturers

96214

Raytheon Company Dba Raytheon

U.s./canadian manufacturers

89954

Bae Systems Controls Inc.

U.s./canadian manufacturers

15280

Northrop Grumman Systems Corporation Div Es Defensive Systems Division

U.s./canadian manufacturers

87557

Lockheed Corp Lockheed Electronics Co Inc

U.s./canadian manufacturers

94117

Bae Systems Information and Electronic Systems Integration Inc. Dba Bae Systems

U.s./canadian manufacturers

00752

L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products

U.s./canadian manufacturers

09922

Souriau Usa, Inc. Dba Souriau Usa Inc

U.s./canadian manufacturers

F0210

Airbus Helicopters (ets de Marignane)

Non-us manufacturer (nato), other foreign organization or codification bureaus

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

3926-90-9988

Description

articles of plastics & articles of other materials of heading 3901 to 3914, nesoi

End Use

12770 - Other industrial supplies

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

89399

(NAICS) North American Industrial Classification System

326199

Questions & Answers

1. What is the FSCG of the NSN 5340-00-975-1440?

   The FSCG of the NSN 5340-00-975-1440 is 5340

2. Does the NSN 5340-00-975-1440 have a Schedule B code assigned?

   Yes, the Schedule B code is 3926909988

3. Does NSN 5340-00-975-1440 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-00-975-1440 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-00-975-1440 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-00-975-1440 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Sun, May 14, 1972