NSN IC/L2D

A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.

+1.00 to 15.00 actuation point pounds per square inch gage contact adjustment range, increase contact action stimulus, external actuation point screw contact adjustment type, deactuation point not adjustable and actuation point adjustable contact adjustability, 3.281 inches nominal body height.

NSN 5930-00-259-3360 Datasheet

(NSN) National Stock Number

5930-00-259-3360

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-259-3360

Requires Demilitarization

Yes

(INC) Item Name Code

00206

Date

Tue, Jan 1, 1963

Schedule B Code

8536509065

Body Height

3.281 inches nominal

Contact Action Stimulus

increase

Contact Adjustability

deactuation point not adjustable and actuation point adjustable

Contact Adjustment Range

+1.00 to 15.00 actuation point pounds per square inch gage

Contact Adjustment Type

external actuation point screw

Contact Load Current Rating

unable to decode

Contact Stimulus Rating

13.75 deactuation point nominal pounds per square inch gage and 1.25 differential point nominal pounds per square inch gage

Contact Voltage Rating In Volts

unable to decode

Frequency In Hertz

unable to decode

Media For Which Designed

gas or liquid

Mounting Method

base

Nominal Thread Size

unable to decode

Nonpile-Up Contact Arrangement

1 pole, single throw, normally closed, momentary action

Outside Diameter

unable to decode

Overall Height

5.125 inches nominal

Overall Length

4.938 inches nominal

Overall Width

3.875 inches nominal

Pressure Connector Type

unable to decode

Pressure Switch Type

gage

Special Features

watertight case

Style Designator

rectangular

Terminal Type

screw

Test Data Document

"81349-mils16032 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

unable to decode

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000206

Cross Reference

CAGE Codes

19278

Detroit Switch Inc Dba Detroit Switch Inc

U.s./canadian manufacturers

96452

American Standard Inc Controls Dept Products Group

U.s./canadian manufacturers

16331

Lockheed Martin Corporation Div Rotary and Mission Systems

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-259-3360?

   The FSCG of the NSN 5930-00-259-3360 is 5930

2. Does the NSN 5930-00-259-3360 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-00-259-3360 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-259-3360 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-259-3360 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-259-3360 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963