NSN ID-810/FPS-20A

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

aluminum alloy case material, an/fps-20a, control shelter equipment an/fps-20 end item identification, consists of section of alodized aluminum l-band waveguide,closed at one end and terminating in a contact flange at other end; incl probe in one wall,feeding thru fixed attenuator to a glow lamp indicator; hand portable; unit designed to function as an antenna horn so that pointing open end toward source of electromagnetic radiation will cause probe to pick up energy and feed it thru attenuator to glow lamp; unit is calibrated so that lamp will not glow until radiation reaches a pre-determined dangerous level; 9.530 in. l,8.700 in. w,6.500 in. h supplementary features, reference data, fig 73-28a, t.o. 31p6-2fps20-4, technical manual, illustrated parts breakdown, radar sets an/fps-20, pg 186 special features.

NSN 6625-00-710-4234 Datasheet

(NSN) National Stock Number

6625-00-710-4234

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

00-710-4234

Requires Demilitarization

Yes

(INC) Item Name Code

08072

Date

Tue, Jan 1, 1963

Schedule B Code

9030908030

End Item Identification

an/fps-20a, control shelter equipment an/fps-20

Material

aluminum alloy case

Special Features

reference data, fig 73-28a, t.o. 31p6-2fps20-4, technical manual, illustrated parts breakdown, radar sets an/fps-20, pg 186

Supplementary Features

consists of section of alodized aluminum l-band waveguide,closed at one end and terminating in a contact flange at other end; incl probe in one wall,feeding thru fixed attenuator to a glow lamp indicator; hand portable; unit designed to function as an antenna horn so that pointing open end toward source of electromagnetic radiation will cause probe to pick up energy and feed it thru attenuator to glow lamp; unit is calibrated so that lamp will not glow until radiation reaches a pre-determined dangerous level; 9.530 in. l,8.700 in. w,6.500 in. h

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0008072

Cross Reference

CAGE Codes

80058

Joint Electronics Type Designation System

Military standards and standards organizations (ex:stanags,milspecs,defstans)

06845

Raytheon Company Dba Raytheon Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

M - 85.0

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-00-710-4234?

   The FSCG of the NSN 6625-00-710-4234 is 6625

2. Does the NSN 6625-00-710-4234 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-00-710-4234 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 6625-00-710-4234 contain precious materials?

   Precious metal content is unknown

5. Does NSN 6625-00-710-4234 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-00-710-4234 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963