NSN INSPECTOR IV

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

accepts 0.500 in. wide magnetic tape up to 3600 feet long; 19.625 in. h; 18.75 in. d; 36.375 in. w; 165.5 lbs; 115vac; 60hz; 6 amps general characteristics item description.

NSN 7035-01-285-4473 Datasheet

(NSN) National Stock Number

7035-01-285-4473

(FSG) Federal Supply Group

70 - Information Technology Equipment (Including Firmware), Software, Supplies and Support Equipment

(FSC) Federal Supply Classification

7035 - Information Technology Support Equipment

(NIIN) National Item Identification Number

01-285-4473

Requires Demilitarization

Yes

(INC) Item Name Code

62140

Date

Wed, Sep 14, 1988

Schedule B Code

8471900000

General Characteristics Item Description

accepts 0.500 in. wide magnetic tape up to 3600 feet long; 19.625 in. h; 18.75 in. d; 36.375 in. w; 165.5 lbs; 115vac; 60hz; 6 amps

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

FLZ - Warner-robins air logistics center 455 byron st robins afb, ga 31098-1860

Pseudo Item Name Code

0062140

Cross Reference

CAGE Codes

10183

Graham Magnetics Inc

U.s./canadian manufacturers

63008

Anacomp Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

M - 85.0

National Motor Freight Class Rating

A - 400.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

59295

Water Commodity

738 - Computing equipment, computer components, and circuit cards

National Motor Freight Classification Item Number

116030

Schedule B & Trade

Schedule B

8471-90-0000

Description

machines and units thereof for processing data, nesoi

End Use

21301 - Computer accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

75290

(NAICS) North American Industrial Classification System

334118

Questions & Answers

1. What is the FSCG of the NSN 7035-01-285-4473?

   The FSCG of the NSN 7035-01-285-4473 is 7035

2. Does the NSN 7035-01-285-4473 have a Schedule B code assigned?

   Yes, the Schedule B code is 8471900000

3. Does NSN 7035-01-285-4473 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 7035-01-285-4473 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 7035-01-285-4473 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 7035-01-285-4473 was assigned to the Federal Catalog?

   It was assigned 38 years ago, on Wed, Sep 14, 1988