NSN IR-97046

A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

0.181 inches minimum and 0.188 inches maximum inside diameter, 120.000 inches nominal length, cass; cable assembly, special end item identification, fungus resistant and flame resistant and water resistant and heat resistant hazardous locations/environmental protection, tubing, plastic, extra flexible, convoluted, ethylene-tetrafluoroethylene, close convolution part name assigned by controlling agency.

NSN 5975-01-533-1544 Datasheet

(NSN) National Stock Number

5975-01-533-1544

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

01-533-1544

Requires Demilitarization

Yes

(INC) Item Name Code

29529

Date

Fri, Sep 2, 2005

Schedule B Code

8543909000

End Item Identification

cass; cable assembly, special

Hazardous Locations/Environmental Protection

fungus resistant and flame resistant and water resistant and heat resistant

Inside Diameter

0.181 inches minimum and 0.188 inches maximum

Length

120.000 inches nominal

Part Name Assigned By Controlling Agency

tubing, plastic, extra flexible, convoluted, ethylene-tetrafluoroethylene, close convolution

Material

unable to decode

Minimum Inside Bending Radius

0.310 inches

Outside Diameter

0.320 inches minimum

Special Features

8-10 convolutions per inch

Style Designator

plain conduit

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0029529

Cross Reference

CAGE Codes

51705

Insulation Sources Inc Dba Ico Rally

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

81343

Society of Automotive Engineers Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

29370

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

050925

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5975-01-533-1544?

   The FSCG of the NSN 5975-01-533-1544 is 5975

2. Does the NSN 5975-01-533-1544 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5975-01-533-1544 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5975-01-533-1544 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5975-01-533-1544 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5975-01-533-1544 was assigned to the Federal Catalog?

   It was assigned 21 years ago, on Fri, Sep 2, 2005