NSN ITE485D5PC7

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

5.500 inches nominal body width, 9.062 inches nominal body height, 8.750 inches nominal body length, unable to decode center to center distance between mounting facilities parallel to width, unable to decode center to center distance between mounting facilities parallel to length.

NSN 5950-00-647-5325 Datasheet

(NSN) National Stock Number

5950-00-647-5325

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-647-5325

Requires Demilitarization

Yes

(INC) Item Name Code

32496

Date

Tue, Jan 1, 1963

Body Height

9.062 inches nominal

Body Length

8.750 inches nominal

Body Width

5.500 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Width

unable to decode

Center To Center Distance Between Mounting Facilities Parallel To Length

unable to decode

Frequency Rating

unable to decode

Inclosure Type

fully inclosed

Input-Output Phase Relationship

unable to decode

Mounting Facility Quantity

unable to decode

Mounting Method

Reliability Indicator

not established

Terminal Type And Quantity

7 standoff, threaded stud

Winding Function And Quantity

Winding Operating Current

Winding Operating Voltage

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032496

Cross Reference

CAGE Codes

80064

Naval Ship Systems Command

U.s./canadian manufacturers

81316

Portsmouth Naval Shipyard

U.s./canadian manufacturers

28528

Itt Industries Inc Itt Aerospace Communications Div East

U.s./canadian manufacturers

31550

L3harris Technologies, Inc. Dba Harris Corporation

U.s./canadian manufacturers

30086

L3harris Maritime Power & Energy Solutions, Inc. Dba Spd Electrical Systems, Inc.

U.s./canadian manufacturers

28527

L3harris Technologies, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-647-5325?

   The FSCG of the NSN 5950-00-647-5325 is 5950

2. Does NSN 5950-00-647-5325 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5950-00-647-5325 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5950-00-647-5325 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5950-00-647-5325 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963