NSN J01101

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

rubber material, 0.1875 inches nominal outside diameter, orthodontist procedures specific use, superior quality-pure latex;precision cut provides consistent forces;use for general purpose;packaged in illustrated zip-lock bags for dispensing convenience-100 elastics per bag 20 bags to each package(approximately 2,000 elastics);wide size selection permits precise degree of control;excellent resistance to fluid absorption special features, intraoral energy elastics part name assigned by controlling agency.

NSN 6520-01-543-5849 Datasheet

(NSN) National Stock Number

6520-01-543-5849

(FSG) Federal Supply Group

65 - Medical, Dental, and Veterinary Equipment and Supplies

(FSC) Federal Supply Classification

6520 - Supplies, Equipment and Dental Instruments

(NIIN) National Item Identification Number

01-543-5849

Requires Demilitarization

Yes

(INC) Item Name Code

13970

Date

Fri, Sep 15, 2006

Schedule B Code

9018490000

Material

rubber

Part Name Assigned By Controlling Agency

intraoral energy elastics

Outside Diameter

0.1875 inches nominal

Specific Use

orthodontist procedures

Special Features

superior quality-pure latex;precision cut provides consistent forces;use for general purpose;packaged in illustrated zip-lock bags for dispensing convenience-100 elastics per bag 20 bags to each package(approximately 2,000 elastics);wide size selection permits precise degree of control;excellent resistance to fluid absorption

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0013970

Cross Reference

CAGE Codes

16013

Rocky Mountain Orthodontics Inc Dba Rmo Inc

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

9018-49-0000

Description

other instruments and appliances, used in dental sciences; and parts and accessories, except dental drill engines, nesoi

End Use

21610 - Medicinal equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87219

(NAICS) North American Industrial Classification System

339114

Questions & Answers

1. What is the FSCG of the NSN 6520-01-543-5849?

   The FSCG of the NSN 6520-01-543-5849 is 6520

2. Does the NSN 6520-01-543-5849 have a Schedule B code assigned?

   Yes, the Schedule B code is 9018490000

3. Does NSN 6520-01-543-5849 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6520-01-543-5849 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6520-01-543-5849 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6520-01-543-5849 was assigned to the Federal Catalog?

   It was assigned 20 years ago, on Fri, Sep 15, 2006