NSN JJ63B225

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

at pole two actuator position designation, trip-reset actuator function, magnetic blowout arc quenching method, rectangular dimensional envelope body style, +1250.0 to 2500.0 ac and +1250.0 to 2500.0 dc all locations adjustable trip setting current range per pole in amps.

NSN 5925-01-294-4584 Datasheet

(NSN) National Stock Number

5925-01-294-4584

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-294-4584

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Thu, Feb 16, 1989

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole two

Adjustable Trip Setting Current Range Per Pole In Amps

+1250.0 to 2500.0 ac and +1250.0 to 2500.0 dc all locations

Arc Quenching Method

magnetic blowout

Body Style

rectangular dimensional envelope

Circuit Protection Type

overcurrent all locations

Features Provided

adjustable trip release

Fragility Factor

moderately rugged

Frequency In Hertz

60.0 all locations

Inclosure Protection Type For Which Designed

dustproof

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 toggle

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

225.0 amperes ac and 225.0 amperes dc all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

22000.0 ac and 18000.0 dc all locations

Mounting Facility Type And Quantity

4 unthreaded hole(s)

Operating Voltage Type And Rating Per Pole In Volts

600.0 ac and 250.0 dc all locations

Overall Height

4.000 inches nominal

Overall Length

11.000 inches nominal

Overall Width

7.500 inches nominal

Pole Quantity

3

Reset Method

manual

Special Handling Feature

magnetic

Storage Type

general purpose warehouse

Terminal Type And Quantity

6 compression

Trip Release Ambient Temp Rating

50.0 celsius nominal all locations

Trip Release Characteristic

instantaneous all locations

Trip Release Method

thermal-magnetic all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 all locations

Unthreaded Mounting Hole Diameter

0.250 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

30086

L3harris Maritime Power & Energy Solutions, Inc. Dba Spd Electrical Systems, Inc.

U.s./canadian manufacturers

66842

Siemens Energy and Automation Inc Ite Circuit Protection Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-294-4584?

   The FSCG of the NSN 5925-01-294-4584 is 5925

2. Does the NSN 5925-01-294-4584 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-294-4584 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-294-4584 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-294-4584 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-294-4584 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Thu, Feb 16, 1989