NSN JJS110

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

hole type body style, 0.343 inches nominal mounting hole diameter, 110.000 continuous current rating in amps, 600.0 ac and 300.0 dc maximum voltage rating in volts, 2.500 inches nominal center to center distance between mounting facilities parallel to length.

NSN 5920-01-254-9978 Datasheet

(NSN) National Stock Number

5920-01-254-9978

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5920 - Fuses, Arrestors, Absorbers and Protectors

(NIIN) National Item Identification Number

01-254-9978

Requires Demilitarization

Yes

(INC) Item Name Code

00248

Date

Thu, May 14, 1987

Body Style

hole type

Center To Center Distance Between Mounting Facilities Parallel To Length

2.500 inches nominal

Continuous Current Rating In Amps

110.000

Maximum Voltage Rating In Volts

600.0 ac and 300.0 dc

Mounting Hole Diameter

0.343 inches nominal

Overall Diameter

1.062 inches nominal

Overall Length

3.250 inches nominal

Terminal Thickness

0.187 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000248

Cross Reference

CAGE Codes

3B150

Raytheon Company Dba Raytheon Co

U.s./canadian manufacturers

49956

Raytheon Company Div Corp

U.s./canadian manufacturers

54X10

Raytheon Company

U.s./canadian manufacturers

71400

Cooper Bussmann, Llc Dba Cooper Industries

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34740

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062060

Questions & Answers

1. What is the FSCG of the NSN 5920-01-254-9978?

   The FSCG of the NSN 5920-01-254-9978 is 5920

2. Does NSN 5920-01-254-9978 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5920-01-254-9978 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5920-01-254-9978 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5920-01-254-9978 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Thu, May 14, 1987