NSN K4175

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

6740-01-018-1999, therometer adapter.

NSN 6740-01-018-1999 Datasheet

(NSN) National Stock Number

6740-01-018-1999

(FSG) Federal Supply Group

67 - Photographic Equipment

(FSC) Federal Supply Classification

6740 - Photographic Developing and Finishing Equipment

(NIIN) National Item Identification Number

01-018-1999

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Mon, Mar 22, 1976

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1013135

Cross Reference

CAGE Codes

19139

Eastman Kodak Co

U.s./canadian manufacturers

Freight Information

Air Commodity

PZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

K - 92.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

63220

Water Commodity

756 - Photo equipment and supplies, other than film or paper (see 759)

National Motor Freight Classification Item Number

039675

Questions & Answers

1. What is the FSCG of the NSN 6740-01-018-1999?

   The FSCG of the NSN 6740-01-018-1999 is 6740

2. Does NSN 6740-01-018-1999 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6740-01-018-1999 contain precious materials?

   Precious metal content is unknown

4. Does NSN 6740-01-018-1999 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6740-01-018-1999 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Mon, Mar 22, 1976