NSN K87400

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

electrical heating method, 60.0 heating element frequency in hertz, 115.0 heating element voltage in volts, flash point tester part name assigned by controlling agency, open design type.

NSN 6630-01-685-4038 Datasheet

(NSN) National Stock Number

6630-01-685-4038

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6630 - Chemical Analysis Instruments

(NIIN) National Item Identification Number

01-685-4038

Requires Demilitarization

Yes

(INC) Item Name Code

19245

Date

Mon, Dec 16, 2019

Schedule B Code

9027803200

Design Type

open

Heating Element Frequency In Hertz

60.0

Heating Element Voltage In Volts

115.0

Heating Method

electrical

Part Name Assigned By Controlling Agency

flash point tester

Special Features

included accessories:ticket printer,test cup,pt100 probe,detection cable,gas tubing,rs232c output,data acquisition software;data storage: 200 results;gas or electric ignition;automatic gas cut-off at the end of the test;equipped with emergency safety switch

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0019245

Cross Reference

CAGE Codes

23035

Koehler Instrument Company, Inc.

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 6630-01-685-4038?

   The FSCG of the NSN 6630-01-685-4038 is 6630

2. Does the NSN 6630-01-685-4038 have a Schedule B code assigned?

   Yes, the Schedule B code is 9027803200

3. Does NSN 6630-01-685-4038 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6630-01-685-4038 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6630-01-685-4038 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 6630-01-685-4038 was assigned to the Federal Catalog?

   It was assigned 6 years ago, on Mon, Dec 16, 2019