NSN KPY121

A device for connecting the ends of two shafts so that rotary motion of one shaft is transmitted to the other shaft. It is constructed to allow for slight misalignment of shafts both linear and angular.

0.780 inches minimum and 0.820 inches maximum center to center distance between bolt holes along width, 6 bolt hole quantity, 0.480 inches minimum and 0.520 inches maximum aperture width, 4.860 inches minimum and 4.900 inches maximum aperture length, 2.680 inches minimum and 2.720 inches maximum center to center distance between bolt holes along length.

NSN 5999-01-342-3920 Datasheet

(NSN) National Stock Number

5999-01-342-3920

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5999 - Miscellaneous Electrical and Electronic Components

(NIIN) National Item Identification Number

01-342-3920

Requires Demilitarization

Yes

(INC) Item Name Code

20281

Date

Sun, Jul 21, 1991

Schedule B Code

8543909000

Aperture Length

4.860 inches minimum and 4.900 inches maximum

Aperture Width

0.480 inches minimum and 0.520 inches maximum

Bolt Hole Quantity

6

Center To Center Distance Between Bolt Holes Along Length

2.680 inches minimum and 2.720 inches maximum

Center To Center Distance Between Bolt Holes Along Width

0.780 inches minimum and 0.820 inches maximum

Cross-Sectional Height

0.048 inches minimum and 0.072 inches maximum

Criticality Code Justification

zzzy

Cross-Sectional Shape Style

emi

Environmental Protection Material Location

throughout rf shielding gasket

Hole Diameter

0.160 inches nominal

Inside Corner Radius

0.030 inches maximum

Material

unable to decode

Outside Edge To Bolt Hole Center Distance Along Width

0.180 inches minimum and 0.220 inches maximum

Outside Edge To Bolt Hole Center Distance Along Length

0.180 inches minimum and 0.220 inches maximum

Overall Length

5.800 inches nominal

Overall Width

1.200 inches nominal

Reference Number Differentiating Characteristics

reference number differentiating material will be in accordance with naval inventory control point activity hx quality control. manufacturing and testing specifications available at the dla icp.

Special Features

item must comply with requirements of defense supply center columbus production standard no. lo4403

Style Designator

non-circular

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020281

Cross Reference

CAGE Codes

07700

Technical Wire Products, Llc Dba Twp

U.s./canadian manufacturers

02750

Eaton Aerospace Llc Dba Eaton Inoac Div Fluid & Electrical Distribution

U.s./canadian manufacturers

06RP6

Drs Naval Power Systems Inc Dba Drs Power & Control Technologies Inc

U.s./canadian manufacturers

16236

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)

Government departments or units, including military organizations

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35070

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

062800

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5999-01-342-3920?

   The FSCG of the NSN 5999-01-342-3920 is 5999

2. Does the NSN 5999-01-342-3920 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5999-01-342-3920 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5999-01-342-3920 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5999-01-342-3920 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5999-01-342-3920 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Sun, Jul 21, 1991