NSN L02070

A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.

breaks before makes single section rear contact switching action, 1.0 amperes resistive load and 100.0 milliamperes inductive load dc at sea level contact load current rating, 115.0 ac at sea level contact voltage rating in volts, unable to decode contact switching action, 1.0 amperes resistive load and 250.0 milliamperes inductive load ac at sea level contact load current rating.

NSN 5930-01-018-2340 Datasheet

(NSN) National Stock Number

5930-01-018-2340

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-018-2340

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Mar 23, 1976

Schedule B Code

8536509025

Contact Load Current Rating

1.0 amperes resistive load and 100.0 milliamperes inductive load dc at sea level

Contact Load Current Rating

1.0 amperes resistive load and 250.0 milliamperes inductive load ac at sea level

Contact Switching Action

breaks before makes single section rear

Contact Switching Action

unable to decode

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

Detent Rotational Torque Range

+8.000 to 115.000 inch-ounces single actuator

First Flat Length

0.250 inches nominal single actuator

Flat Height

0.219 inches nominal single actuator

Hazardous Locations/Environmental Protection

explosion proof

Individual Section Quantity

1

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Radius

0.375 inches nominal at 3:00 oclock

Nonturn Device Type

tab at 3:00 oclock

Operating Temp Range

-65.0 to 125.0 celsius

Overall Diameter

1.155 inches minimum and 1.195 inches maximum

Overall Length

1.859 inches minimum and 1.985 inches maximum

Pole Quantity

2 single section front

Precious Material

silver

Precious Material And Location

terminal surfaces and contacts silver

Rotor Through Connection Quantity

2 single section

Shaft Diameter

0.250 inches nominal single actuator

Shaft Flat/Slot Angular Location

180.0 degrees from contact position 1 single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.437 inches nominal single actuator

Style Designator

tap, circular, bushing mount

Switch Actuator Indexing Position Quantity

5 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Positioning Increment

unable to decode

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.437 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

5 single section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

81073

Grayhill Inc

U.s./canadian manufacturers

16236

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)

Government departments or units, including military organizations

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-018-2340?

   The FSCG of the NSN 5930-01-018-2340 is 5930

2. Does the NSN 5930-01-018-2340 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-01-018-2340 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-018-2340 contain precious materials?

   Item contains silver.

5. Does NSN 5930-01-018-2340 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-018-2340 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Tue, Mar 23, 1976