NSN L503000053

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

0.119 cubic inches cubic measure, continuous duty type, an/tyq-23(v)1 end item identification, feat criticality code justification, 1 coil quantity.

NSN 5945-01-332-3274 Datasheet

(NSN) National Stock Number

5945-01-332-3274

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

01-332-3274

Requires Demilitarization

Yes

(INC) Item Name Code

32512

Date

Thu, Jan 10, 1991

Schedule B Code

8536490050

End Item Identification

an/tyq-23(v)1

Coil Quantity

1

Criticality Code Justification

feat

Cubic Measure

0.119 cubic inches

Duty Type

continuous

Environmental Protection

hermetic and heat resistant

Fragility Factor

moderately rugged

Main Contact Load Current Rating At Maximum Rated Voltage

unable to decode

Main Contact Maximum Voltage Rating In Volts

115.0 ac and 28.0 dc

Mounting Facility Type And Quantity

1 terminal single mounting facility

Nonpile-Up Main Contact Arrangement

4 pole, double throw, one position momentary

Operating Voltage Rating And Type At Specified Temp

unable to decode

Overall Height

0.320 inches maximum

Overall Length

0.610 inches maximum

Overall Width

0.610 inches maximum

Purpose For Which Designed

general

Special Features

established reliability 1.0 percent

Specification/Standard Data

81349-mil-r-39016/53 government specification

Storage Type

general purpose warehouse

Terminal Type And Quantity

unable to decode

Test Data Document

"81349-mil-r-39016 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Time Delay

unable to decode

Winding Dc Resistance Rating

Winding Quantity

1

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0032512

Cross Reference

CAGE Codes

36090

Lockheed Martin Librascope Corp

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-49-0050

Description

relays, electromechanical, with contacts rated at less than 10 a, for a voltage exceeding 60 v but not exceeding 1000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77254

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5945-01-332-3274?

   The FSCG of the NSN 5945-01-332-3274 is 5945

2. Does the NSN 5945-01-332-3274 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536490050

3. Does NSN 5945-01-332-3274 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5945-01-332-3274 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5945-01-332-3274 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5945-01-332-3274 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Thu, Jan 10, 1991