NSN L5203070-005

A clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see clamp, hose, special-shaped. Excludes:clamp, electrical; clamp, loop; clamp, fire hose, shutoff; ferrule (as modified); and hand screw.

2.940 inches nominal distance from pivot pinhole center to rod connection end, 0.2495 inches minimum and 0.2505 inches maximum hole diameter, 0.508 inches nominal fork depth, 0.408 inches minimum and 0.413 inches maximum fork span width, 0.094 inches nominal fork arm thickness.

NSN 5340-01-164-1914 Datasheet

(NSN) National Stock Number

5340-01-164-1914

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-164-1914

Requires Demilitarization

Yes

(INC) Item Name Code

03796

Date

Thu, Oct 13, 1983

Distance From Pivot Pinhole Center To Rod Connection End

2.940 inches nominal

Fork Arm Thickness

0.094 inches nominal

Fork Depth

0.508 inches nominal

Fork Span Width

0.408 inches minimum and 0.413 inches maximum

Hole Diameter

0.2495 inches minimum and 0.2505 inches maximum

Material Document And Classification

qq-s-763,cond b fed spec single material response overall

Material

steel comp 304 overall

Nominal Thread Size

0.250 inches rod connection

Overall Width

0.596 inches minimum and 0.601 inches maximum

Shank Diameter

0.250 inches nominal

Special Features

slot 0.032 in. by 0.036 in. along shank

Thread Class

3a rod connection

Thread Direction

left-hand rod connection

Thread Length

0.620 inches nominal rod connection

Thread Series Designator

unified national joint fine (unjf) rod connection

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0003796

Cross Reference

CAGE Codes

43999

The Boeing Company Div Legacy Am&m

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

U - 50.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49240

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

094140

Questions & Answers

1. What is the FSCG of the NSN 5340-01-164-1914?

   The FSCG of the NSN 5340-01-164-1914 is 5340

2. Does NSN 5340-01-164-1914 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-164-1914 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-164-1914 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-164-1914 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Thu, Oct 13, 1983